Tiller Tiller on the tractor crooked with tractor ?

[LBrown59]

The right end of the tiller is 1.5 to 2 inches closer to the rear tire than the left end.

How do I square it up so the tiller runs straight across the back of the tractor instead of at an angle?

[Ray2310]

Mine had the same problem. I moved the adjustment on the 3 point arms until it was strait.

[mrutkaus]

yes same here just 1.5" or so. adjust the "stabilizers" the part nearest each tire (at least on my kioti ck30) to move in the correct direction. also if there is a height adjustment on one side of the 3-pt hitch could adjust it for up and down

mike

[LBrown59]

yes same here just 1.5" or so. adjust the "stabilizers" the part nearest each tire (at least on my kioti ck30) to move in the correct direction.
mike

Are you talking about moving the 2 arms by adjusting the check chains?

Am I on the right track here or have I got it all wrong
?

[Ray2310]

Are you talking about moving the 2 arms by adjusting the check chains??

Thats what I meant. Your on the right track.

[LBrown59]

Thats what I meant. Your on the right track.

Thanks ;
Just wanted to check with the fellows on the board just to make sure before going ahead on my own and maybe screwing things up by doing the wrong thing.
I have little to no experience with a 3 point hitch.

[LBrown59]

Just got done squaring the tiller up with the tractor .

Looks good.

Thanks for your help everyone.