Results 1 to 10 of 18
-
10-02-2008, 07:58 PM #1Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Markham Grapple w/John Deere QA setup
I spoke with Melissa yesterday to order my LD-48 Grapple and we talked about the JD QA setup they are offering-She is still learning the tractor side of the business since they primary bread&butter is SSL attachments. So I thought I would let all the JD owners know that their QA setup will fit all the current JD loaders because they are adding two sets of pins for the two different spacings. The extra cost is $80.00 for this setup.
So, just to give a list-it will fit these JD loaders:
210, 410, 420, 430, 460, 200xx, 300xx, 400xx, 5xx
I will get pictures when mine arrives
Last edited by kennyd; 10-02-2008 at 08:27 PM. Reason: added 200xx loader (Thanks Kernal)
John Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
-
10-02-2008, 08:24 PM #2Silver Member
- Join Date
- Nov 2007
- Posts
- 109
- Location
- Rochester NY
- Tractor
- JD 2320
Re: Markham Grapple w/John Deere QA setup
What no 200cx Kenny????
And you beat me to ordering a 48" from Markham.......JD 2320 w/ R4's, 200CX w/ 61" bucket, 46BH w/ 16" bucket, 62D MMM w/ mulch kit, Imatch, Ballast Box, Frontier BB 2060, Frontier 1060 Landscape Rake, Frontier Pallet Forks, Frontier SB1154 Snow Blower, Meyers 6.5 TM snowplow, Markham 48" Grapple, Trac-Vac 854
-
10-02-2008, 08:26 PM #3Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Re: Markham Grapple w/John Deere QA setup
Whoops
Originally Posted by kernal
John Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
-
10-02-2008, 08:26 PM #4Silver Member
- Join Date
- Nov 2007
- Posts
- 109
- Location
- Rochester NY
- Tractor
- JD 2320
Re: Markham Grapple w/John Deere QA setup
BTW, what did you order? spacer tines?
JD 2320 w/ R4's, 200CX w/ 61" bucket, 46BH w/ 16" bucket, 62D MMM w/ mulch kit, Imatch, Ballast Box, Frontier BB 2060, Frontier 1060 Landscape Rake, Frontier Pallet Forks, Frontier SB1154 Snow Blower, Meyers 6.5 TM snowplow, Markham 48" Grapple, Trac-Vac 854
-
10-02-2008, 08:30 PM #5Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Re: Markham Grapple w/John Deere QA setup
I got the LD-48", JD QA, NO spacers (can add then latter if I need them), No hoses/coupler's, Wider top(they are all 30" now), and Serrated teeth(They all have then now also) Originally Posted by kernal
John Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
-
10-02-2008, 11:01 PM #6Super Member
- Join Date
- Oct 2005
- Posts
- 6,807
- Location
- Foothills of the Giant Sequoia's, California
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Re: Markham Grapple w/John Deere QA setup
Congratulations Kenny, that grapple sure has been a big hit here, and for a good reason. Looks like Markham's products are great.
Will it be a big install or I suppose you have everything for up front already?
I can't wait to see photos of it and also using it.
-
10-03-2008, 06:10 AM #7Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Re: Markham Grapple w/John Deere QA setup
Thanks Rob. I already have the hydraulics to run it, I added a diverter to my FEL a few years ago to run the angle on a FEL snowplow that I had built. The plow is gone now-so it will be nice to use my investment again
FEL Remote
Joystick HandleJohn Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
-
11-06-2008, 07:41 PM #8Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Re: Markham Grapple w/John Deere QA setup
Here are some pictures, getting hoses tomorrow
Weight according to the truck scale near work is 420lbs.John Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
-
11-06-2008, 08:24 PM #9Gold Member
- Join Date
- Dec 2004
- Posts
- 373
- Location
- Davidsonville, Maryland
- Tractor
- John Deere 4400, '48 B and 318
Re: Markham Grapple w/John Deere QA setup
Kenny: Looks to me like you need a place to test that out! We're doing firewood now. Not getting any trees from Phil, getting all the downed oak I need from the new place behind our house where we go plinking.
Looks Fun!
Wayne
-
11-07-2008, 04:55 PM #10Super Star Member
- Join Date
- Jul 2003
- Posts
- 11,091
- Location
- Westminster, MD
- Tractor
- John Deere 4110
Re: Markham Grapple w/John Deere QA setup
Got the hoses today, so here a few more pictures...
John Deere 4110HST
FEL, MMM, FEL Forks (homemade),I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.
John Deere 4x2 Turf Gator
View some of my projects/adventures in my Picasa Album
Simple JDParts Tutorial HERE
Reply With Quote
