Results 11 to 16 of 16
-
10-30-2008, 09:06 PM #11Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,050
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Questions about attachments
As JB said.. unless the 8n has had a pto shaft change.. it may still have the oem 1 1/8 6 spline shaft and not the 1 3/8 modern 6 spline shaft.
An overrunning coupler will fix the splines dimeter issue and make a mower safe-er to run on the tractor.
sounduy
-
10-30-2008, 09:13 PM #12Platinum Member
- Join Date
- Sep 2004
- Posts
- 877
- Location
- P-Town, Upstate New York
- Tractor
- Montana 4340C w/Loader, JD GX345 w/54in. mower
Re: Questions about attachments
I thought most of the 8n's came with the larger shafts? I have replaces a few in the 9n's and 2n's but never in an 8n.
Originally Posted by Soundguy
Montana 4340C w/loader, AgroTrend FU78 rear snowblower with hydraulic shute rotation, Horst 48" pallet forks, 3pt. 2-bottom plow, 6ft. bush hog rotarty cutter, 3pt. Woods 7ft back blade, 3pt. cultivator, 5ft 3pt. york rake, 6' KKII tiller, JD494 4-row planter. Future attachments: backhoe, grapple
-
10-30-2008, 09:18 PM #13Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,050
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Questions about attachments
ALL the 8ns came with the small shaft. There was a 'SAE shaft upgrade.
The small shafts were still being used into the NAA model, post 8n.. I have an NA witht he small shaft.. etc..
soundguy
-
10-30-2008, 09:25 PM #14Platinum Member
- Join Date
- Sep 2004
- Posts
- 877
- Location
- P-Town, Upstate New York
- Tractor
- Montana 4340C w/Loader, JD GX345 w/54in. mower
Re: Questions about attachments
i learn something new everyday.
Montana 4340C w/loader, AgroTrend FU78 rear snowblower with hydraulic shute rotation, Horst 48" pallet forks, 3pt. 2-bottom plow, 6ft. bush hog rotarty cutter, 3pt. Woods 7ft back blade, 3pt. cultivator, 5ft 3pt. york rake, 6' KKII tiller, JD494 4-row planter. Future attachments: backhoe, grapple
-
10-30-2008, 11:43 PM #15Super Member
- Join Date
- Sep 2000
- Posts
- 6,358
Re: Questions about attachments
Actually, some of the early 640's had the small shaft too. Least ways, a buddy has one with the small shaft, a 1955 640.
jb
-
11-01-2008, 12:44 AM #16Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,050
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Questions about attachments
Ditto that...I've also seen early 55's with the small shaft.. etc.
soundguy
Reply With Quote
