mentat30
Bronze Member
Thought I would share pics of the chute rotator and deflector. The chute rotater is from Buhler the cylinder I bought from Burden Sales Surplus Center and the chute deflector is made from a satellite dish linear actuator that I cut down to fit. I bought the switch and the project box from Radio Shack. The switch is mounted in the project box, the project box has a magnet on the back, to hold it on the back of the plate that the rear remotes are mounted on. I wired it to the tractor using a trailer connector so that when I unhook the snow blower the switch stays with the snow blower. I don't need the switch on the tractor in the summer when I mowing lawn etc.