"Construction Attachments" 4 in 1 bucket

   / "Construction Attachments" 4 in 1 bucket #3  
Builder, I have had that same model and size 4-in-1 bucket on my L39 since it was new (~800 hrs).The only difference is mine has a bolt on cutting edge on the bucket. It has been indestructable despite my best efforts. It is easy to use and service. CA's customer service is about the best I have seen. I give it " two thumbs up" based on my experience.
 
Last edited:
   / "Construction Attachments" 4 in 1 bucket #4  
I bought a set of their pallet forks and gave them a pretty good workout, popping a few good size rocks out of the ground. Decent quality equipment for the money and I found CA real easy to work with.

I'd buy from them again.

-John
 
   / "Construction Attachments" 4 in 1 bucket #5  
I also have one of their pallet forks. Great price and good quality. I plan to make a "man lift" to use them with.
 
   / "Construction Attachments" 4 in 1 bucket #6  
   / "Construction Attachments" 4 in 1 bucket #7  
I do not know first hand, but in my research for a 4-in-1 I found these to be of top notch quality and was not exceeded by anyone else.
 
   / "Construction Attachments" 4 in 1 bucket #8  
It is neat to read the great reviews about Construction Attachments products. The owner Charles Corriher is my brother, and we have their full line of products available for purchase online at our website (Temporarily blocked due to reports of company closure) along with free shipping to the lower 48 states!

I have to say, it is very rare that we get any complaints about the quality of the attachments they produce, and our customers put them through the ringer on a regular basis.
 
   / "Construction Attachments" 4 in 1 bucket
  • Thread Starter
#9  
It is neat to read the great reviews about Construction Attachments products. The owner Charles Corriher is my brother, and we have their full line of products available for purchase online at our website (Temporarily blocked due to reports of company closure) along with free shipping to the lower 48 states!

I have to say, it is very rare that we get any complaints about the quality of the attachments they produce, and our customers put them through the ringer on a regular basis.

I think I spoke with you over the weekend!

I'm trying to decide between your 4 in 1 and a lightly used Woods 4 in 1 bucket I found. The woods is ~100 lbs heavier (644 lbs) than yours. Your's is more expensive, but the shipping is free. The Woods is considerably cheaper ($1,200), but I have to ship it 1/2 way across the country. :eek: that's not cheap.....looks like ~$500 yeouch! :eek:
 
   / "Construction Attachments" 4 in 1 bucket #10  
I was looking at 4 in 1 buckets and thought I really wanted one. Then I tried it out and was very disappointed with it. One was on a newer New Holland full sized backhoe, and the other was on a Case backhoe that was about five years old. Both functioned perfectly, but I found it very hard to judge how much the bucket was open and to know exactly where I was at when picking up branches and stumps.

Both guys told me that you get better at it with practice, and they both licked their 4 in 1 buckets, but the longer I was there, the more they admitted to things that they didn't care for. They have both bent their buckets while trying to carry trees. If you have a tree that's long and sticking out way past the sides of the bucket, you can very quickly bend the bucket. One guy did it twice, the other did it once.

The best part of it is the ability to move dirt and pick up something with out having to get off of the seat or change anything. But for moving allot of debris, it's not very good. It's hard to pick up odd shapes. Branches tend to only be held in place at one point and will twist around on you. It just doesn't get a good hold of what you are trying to carry and it's not uncommon to drop stuff.

After that, I went back to looking at root grapples. I changed everything over to a skid steer universal quick attach system, which I don't recommend for full sized loader/backhoes, but I learned that lesson the hard way. There are other systems that are better and stronger. I can switch from the grapple to the bucket in just a few minutes. I haven't timed myself, but thing 15 minutes is about right. It really depends on how hard the hydraulic hoses are to get apart. They are my biggest challenge.

With my grapple, I can pick up just about anything and carry it as far as I need. I have to grapples on it, so each one closes until it's solid. If I have a stump on one side and a thin tree on the other, it doesn't matter. That feature alone should be a must on any grapple system. I've had brush piles that the grapple on one side almost seems like it's still wide open, while the grapple on the other side is half closed to get a tight hold on what I'm carrying.

The real test is that my 70 year old dad can use it and was able to figure it out almost instantly. He's a heck of a worker, but doesn't handle new things very well. With this, he can clear land all day long and not break anything. I had allot of fear with him and a 4 in 1 bucket. Especially when I learned of how easily they can be bent.

Good luck,
Eddie
 
 
 
Top