Tom_H
Veteran Member
I posted the following in the Kubota Owning and Operating Forum. I am reposting here, in hopes that others will have ideas to contribute as well. I am posting a link below to the original post, so that all replies can be in the same thread.
I keep the BX 2200 and all the implements in the garage. If I leave the Markham tooth bar (5 teeth) on the FEL when removing the FEL, it gouges the concrete when removing and also when reattaching, so I take the toothbar off before removing the FEL. (My FEL front edge has to be at 20 degrees down tilt for removal.)
I know I could come up with something to quickly and easily cover the teeth prior to FEL removal so I don't have to take the TB off, but I figure someone else likely already has a solution.
Any ideas? Pics welcome!
Thanks guys.
Please reply at:
http://www.tractorbynet.com/forums/kubota-owning-operating/140305-need-idea-fel-tb-caps.html
I keep the BX 2200 and all the implements in the garage. If I leave the Markham tooth bar (5 teeth) on the FEL when removing the FEL, it gouges the concrete when removing and also when reattaching, so I take the toothbar off before removing the FEL. (My FEL front edge has to be at 20 degrees down tilt for removal.)
I know I could come up with something to quickly and easily cover the teeth prior to FEL removal so I don't have to take the TB off, but I figure someone else likely already has a solution.
Any ideas? Pics welcome!
Thanks guys.
Please reply at:
http://www.tractorbynet.com/forums/kubota-owning-operating/140305-need-idea-fel-tb-caps.html