mjb34500
New member
I was wondering how safe/feasible it would be to put a universal PTO backhoe implement on the back of my 135? Would it be prudent to fabricate a frame for it?
Backhoe Backhoe for Massey 135
- Thread starter mjb34500
- Start date
Volp
Silver Member
- Joined
- Jun 14, 2002
- Messages
- 110
- Tractor
- Massey Fergussom MF35, Kubota B6001, JD LX186 Lawn tractor. Ford Super Dexta 3000
Hello mjb34500,
I have got a Massey Fergusson 35 and I converted a Backhoe used on a skid steer to 3 pt mounting. After lifting it with the 3 pt it is secured by adjustable rigid beams to the tractor at the fixing points just below the top link attachment. The first picture shows the backhoe with my simple thumb. The second is a close-up on the mounting. You can see the yellow beams going to the same pins as the 3 pt and also the yellow top link, which is forked at the tractor end going to the same fixing points as the beams. Unfortunately I have no picture available showing the tractor ends and as I am not getting back to Sweden for another month so I cannot get a better picture now.
This arrangement has worked for me without problems although the output from the hydraulic pump in the tractor does not allow speed digging. It is working fast enough for my needs.
I have got a Massey Fergusson 35 and I converted a Backhoe used on a skid steer to 3 pt mounting. After lifting it with the 3 pt it is secured by adjustable rigid beams to the tractor at the fixing points just below the top link attachment. The first picture shows the backhoe with my simple thumb. The second is a close-up on the mounting. You can see the yellow beams going to the same pins as the 3 pt and also the yellow top link, which is forked at the tractor end going to the same fixing points as the beams. Unfortunately I have no picture available showing the tractor ends and as I am not getting back to Sweden for another month so I cannot get a better picture now.
This arrangement has worked for me without problems although the output from the hydraulic pump in the tractor does not allow speed digging. It is working fast enough for my needs.
Attachments
EV59
Member
If your looking for a good used hoe to fit on your 135 send me a note....Do you have a Loader? Unit I have is a B15A Kelly Hoe. Has self contained hydraulics that work off PTO...$ 2,995 Located in SC 864-940-9341