Results 1 to 2 of 2
  1. #1
    Bronze Member
    Join Date
    Aug 2005

    Default York rake help

    I have a 6 foot york rake and have never been very successful using it. Its on a kubota B8200. First off, i cant get it properly level at all heights, 2 to 3" lower on one side. I suppose the linkage is a bit worn on the 3 point. However, this rake has 2 wheels that follow behind. I have never used the wheels and am wondering what the purpose of them is. Im not working with truckloads of fresh topsoil. I usually filling in 20' depressions from trees stumps i removed in the past. Im working the 3 point up and down as i spread dirt which probably isnt right. Any suggestions.

  2. #2
    Elite Member ToadHill's Avatar
    Join Date
    Oct 2005
    Catt county New York
    Kioti DK35, Ford 8N, Oliver Cletrac

    Default Re: York rake help

    The wheels are designed to follow the contours of the land and avoid the rake digging in and causing depressions in the soil. If you use them and have them properly adjusted they work well to level the area if it is flat, or evenly spread the soil if the land is sloped.
    I can't control my day but I can control my attitude.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.