Results 1 to 4 of 4
  1. #1
    Bronze Member
    Join Date
    Apr 2009
    Posts
    70
    Location
    Craig, Montana

    Default

    disregard
    Last edited by FN in MT; 06-24-2009 at 06:29 PM. Reason: disregard

  2. #2
    Elite Member
    Join Date
    Oct 2000
    Posts
    3,055
    Location
    Windham County, Conn
    Tractor
    Ford 2120 , New Holland TN75D, Hitachi UH083LC Excavator

    Default Re: Can NOT install driveline onto PTO..

    Are you sure the collar goes forward and not the other way. Hold the pto shaft up and look into the end while you slide the collar. watch for the detent to retract to know which way it works. Sometimes they are juwst tight for a while and a wire brush or a little sand paper folled by some spray grease will help. Good luck.

    Andy

  3. #3
    Bronze Member
    Join Date
    Apr 2009
    Posts
    70
    Location
    Craig, Montana

    Default Re: Can NOT install driveline onto PTO..

    MADE in CHINA POS collar. Took it apart and removed SEVERAL metal chips.

    Works fine now.

    FN in MT

  4. #4
    Veteran Member have_blue's Avatar
    Join Date
    Oct 2003
    Posts
    1,730
    Location
    Eunice, Louisiana
    Tractor
    L4400

    Default Re: Can NOT install driveline onto PTO..

    Quote Originally Posted by FN in MT View Post
    MADE in CHINA POS collar. Took it apart and removed SEVERAL metal chips.

    Works fine now.

    FN in MT
    I know what you mean. The gear box shaft on my Chinese RFM were about .006 too large for the coupling. I had to file the splines down just to slip it on!
    -

    Bob

    From the heart of Cajun Country

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.