Results 1 to 8 of 8
-
07-24-2009, 08:44 PM #1New Member
- Join Date
- Jul 2009
- Posts
- 2
- Location
- Eudora, Ks.
- Tractor
- Ford 4000 G
Can anyone ID this brush cutter?
Can't find any label, was re-painted Ford blue but I need to know what brand to find parts.
Thanks,
-
07-25-2009, 01:47 PM #2New Member
- Join Date
- Jul 2009
- Posts
- 18
- Location
- Stonewall, Manitoba, Canada
- Tractor
- CT440 FEL w/Cab
Re: Can anyone ID this brush cutter?
Looks like an older Sovena... Can't find their website but you should find a match on Ebay.
-
07-25-2009, 09:27 PM #3Veteran Member
- Join Date
- May 2006
- Posts
- 2,203
- Location
- Lexington, SC
- Tractor
- 2001 John Deere 790 4x4, bar tires
Re: Can anyone ID this brush cutter?
Is it possible it's a Ford 951 mower??? There's a pic of one on this manual:
Ford 951 951A Mower Parts Operators
There looks to be a very strong resemblance between these two mowers anyway, and the fact yours is blue gives another another reason to think that.Nothing could be finer than riding my JD790 in South Carolina!!
2001 John Deere 790 4x4 with Model 70 FEL, 5ft International World Agritech bush hog, 5ft Wallberg BB, 5ft Frontier disc harrow, 5ft King Kutter II Rototiller, 5ft Cultipacker, 5ft Sitrex finish mower, Leinbach PHD with 9" & 12" augers, Leinbach middlebuster, Leinbach #11 Field Cultivator, boom pole, custom 3pt handi-hitch, clamp on bucket forks, Pat's Easy Change.
Nothing runs like a Deere, or smells like a John....
-
08-17-2009, 01:20 AM #4New Member
- Join Date
- Jul 2009
- Posts
- 2
- Location
- Eudora, Ks.
- Tractor
- Ford 4000 G
Re: Can anyone ID this brush cutter?
Found some info on Sovema agricultural implements but couldn't find any pics. Did not appear to match the Ford suggested, the 'under' color may be a light gray.
I was surprised that 250 folks looked at the pics and no one recognized it. Not encouraging for finding parts, maybe the welding shop can make them. Thanks for the suggestions.
-
08-17-2009, 08:47 AM #5Veteran Member
- Join Date
- Aug 2005
- Posts
- 1,020
- Location
- Guernsey Co. Ohio
- Tractor
- Ford 3000
Re: Can anyone ID this brush cutter?
If I remember right mine is a 951. Though there are some similarities, there are enough differences that I don't think that's it.
-
08-17-2009, 06:32 PM #6Epic Contributor
- Join Date
- Mar 2002
- Posts
- 46,030
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Can anyone ID this brush cutter?
looks like a 4' 951 I used to have.. square and all..
soundguy
-
08-17-2009, 09:02 PM #7Platinum Member
- Join Date
- Oct 2006
- Posts
- 587
- Location
- Thumb, Mich
Re: Can anyone ID this brush cutter?
I don't think so, the gearbox is different. Ford's bolted down to the deck, HyCo attached their gearbox to the sides like the OP's pics. The Fords were made by BMB around that time if I remember rightly.
Originally Posted by kebo
The Opti-Mist
-
08-17-2009, 09:35 PM #8Elite Member
- Join Date
- Dec 2005
- Posts
- 4,091
- Location
- Jacksonville, Florida
- Tractor
- JD2555
Re: Can anyone ID this brush cutter?
So what parts do you need? I think that is the same as one of the pieces of junk I have out in the back yard. Too late to make sure, but I am reasonably sure it "might" be.
David from jaxA serious accident is one that money won't fix.
Reply With Quote
