Results 1 to 3 of 3
  1. #1

    Default Help needed identifing this plow

    I have this single bottom breaker plow that I'm trying to figure out who manufactured it. The only markings on the plow are the individual part numbers that are part of each casting. Any info would be greatly appreciated.
    Attached Thumbnails Attached Thumbnails -dscn3546-jpg  

  2. #2
    Bronze Member
    Join Date
    Mar 2009
    Posts
    54
    Location
    New Brunswick, Canada

    Default Re: Help needed identifing this plow

    Sometimes the part numbers will give a clue. Some of the old-time manufacturers like Massey and Cockshutt had combinations of letters and numbers. Can you see anything on the back side of the mouldboard, share, or landside?
    The wearing parts are in really good condition.

  3. #3

    Default Re: Help needed identifing this plow

    The individual part numbers all start with E.P. Example: E.P. 358
    Unfortunately the markings on the mouldbord can't be read.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.