Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Dec 2009
    Posts
    15
    Location
    Northwest NC
    Tractor
    MF135 3 cyl Perkins

    Default front mount pump for loader

    Hi, im new here, just wondering if anyone knows what kind of pump and bracket i need to put a loader on a 135 massey ferguson. its a '70s model with a 3cyl perkins diesel. I'd like a front mounted pump cause i have a pto winch on the back. appreciate any help.

  2. #2
    Platinum Member
    Join Date
    Oct 2006
    Posts
    735
    Location
    Thumb, Mich

    Default Re: front mount pump for loader

    Check into a loader that has the pump mounted on the loader frame. MF has/had front mounted pumps and pump drives. The most simple pump drive I've seen had a fluted/splined shaft that simply was an interference fit into the engine crankshaft driven pulley. That shaft connected to the pump drive shaft with a flex (rag) joint to accomodate minor misalignment. A pump mount consisting of a couple of pairs of plates to allow for vertical and horizontal adjustment will minimize driveshaft misalignment. Something along these lines should work for you.
    The Opti-Mist

  3. #3
    New Member
    Join Date
    Dec 2009
    Posts
    15
    Location
    Northwest NC
    Tractor
    MF135 3 cyl Perkins

    Default Re: front mount pump for loader

    Thanks for the advice, i've never seen one with the pump mounted on the loader, i'm still trying to find a used loader that will fit. Any suggestions on pump gpm? i had considered a 2 stage pump but i've never heard of anyone trying that. Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.