Rear Blade Rear blade hydraulic angle kit

[DrewL]

I have a 6' three point hitch manual angle rear blade with rear hydraulic remotes on my tractor for a backhoe. Is there a kit one could purchase, cylinder, hoses and valve to make my blade hydraulic angle? Or, possibly purchase these items seperately to make the kit myself?

Thanks Drew

 

[radman1]

Depending on the company, some blades are easily adaptable for hydraulic angle. This is more common on the mid sized and large blades. I noticed you have a BX and probably a small blade. Rare for small blade to be set up from factory with the possibility of easily mounting a hydraulic cylinder. Show us a picture of your blade and we can give you ideas. However, there is no kit available and these projects are usually hand fabricated or pay someone to do it. You will need a welder, something to cut metal, drill large holes, find the correct cylinder, buy hoses, fittings ect.

 

[MtnViewRanch]

BX? Where do you see that Radman? It looks like he has a Kioti CK30 with a 6' rear blade.

Anyway, as Radman has said, for that size blade, you will need to fabricate everything. Not really that big of a deal, but no kits available as far as I know. Take a look at some bigger blades that either have the hydraulics or at least set up for them and that in it self will help you out a lot. The smallest factory built hydraulic angle blade that I can find is a Land Pride RBT35 Series Rear Blades. Most of the OEM guys pretty much build the hydraulic capable blades in the same manor. Do you have or consider A top and tilt set? The tilt function is really nice to have when using a rear blade.

 

[jnjpream]

Oooo, I like the hydro offset feature on that blade! I think it will make the project list.

(Unfortunatley it's something like number 5239 on that list..)

 

[MtnViewRanch]

It is a very nice blade, I would love to have the RBT3584 to use with my 3215. But, I will have to wait for awhile.

 

[DrewL]

I am aware that I will have to do some fabricating and am capable of doing it. Just wondering on a valve, hose set and cylinder.

 

[MtnViewRanch]

It it were me, I would get the 2 std rear remote valves for your CK30. Get either a 3" minimum dia or 3 1/2" diameter x 14" stroke cylinder with clevis ends. Either have your dealer or local hydraulic shop make up the hoses. Or if you want to make them yourself you can get everything that you need to make your own hoses with reusable ends from Discount Hydraulic Hose. Reusable Hose Fittings > Discount Hydraulic Hose.com

Hope that some of this helps.

 

[DrewL]

Yes it is helpful. It makes me realize to forget about a hose set up as I can obtain them locally. You identified the cylinder...............what about a valve?

 

[6sunset6]

I did exactly that
http://www.tractorbynet.com/forums/hydraulics/120482-selector-valve-11.html

You could look at the whole string . With one remote pair and a tree way selector valve you can run three functions.
I did Top, Tilt and angle on the blade.

 

[MtnViewRanch]

Yes it is helpful. It makes me realize to forget about a hose set up as I can obtain them locally. You identified the cylinder...............what about a valve?

As I had said, I would use the standard Kioti rear remote valve that you need to get from your Kioti dealer. If you do not want to go that route, then go and look at Surplus Center for one of the valves that they have to sell.

https://www.surpluscenter.com/sort.asp?UID=2156010617554486&catname=hydraulic&keyword=HDD1

I need 3 remotes on my Mahindra 3215HST, so I have the 1 available factory remote and 2 alternative remotes.