Flail Mower Caroni Flail Mower TM1900BSC

[602466]

On the web site it states:

"Two rotors can be used: type A for a normal cut, and type F, fitted with twice the number of blades with respect to type A, to give a more accurate and closer cut".

Does this mean I can have both rotors installed at the same time or do I have to swap them out? If I have to swap them out is it a pain? Has anyone done this?

I have 3 acres of lawn that I use a Bush Hog RDTH-72 finisher mower on. It works great so far. I have 10 acres that I bush hog on. That mower needs to be replaced this year. I was thinking, could one machine do both?

I am purchasing the Flail for the 10 acres thats a given, but should I also purchase the extra rotor for a finish cut? I would not get rid of the Bush Hog finish mower as I don't want to be down to one mower if the flail should break.

What do you think?

Thanks;

Wally

[IXLR8]

You will need to swap drums... if it can be done. Not sure if you will really need to though. From what I have seen, the 'rough' cut flail typically gives a better cut than a Bush Hog style mower.
Have you seen this thread on Flail mowers?
http://www.tractorbynet.com/forums/a...il-mowers.html

[602466]

IXLR8

Better than a Bush Hog finish mower? If thats the case no swapping rotors or mowers!

Thanks for the reply.

Wally

[IXLR8]

IXLR8
Better than a Bush Hog finish mower? If thats the case no swapping rotors or mowers!
Wally

Sorry, I have not seen the results of a BH finish mower so I can't do a comparison to one.

[602466]

IXLR8:

Thanks for the reply!

Wally