Where to find this Lower Link Pin

[dsimon552]

Anyone know where I can find one of these. I cannot find them at local Tractor supply. It goes on a 50-60 Year old ripper. On the ripper one hole is 7/8" and the other appears to be 1/2" which is why it has the 7/8" part and then the threads start.

Any help is appreciated

 

[whistlepig]

Would a 7/8"x1/2" bushing work?

 

[gwdixon]

Buy the components you need and take it to a welding shop to have it put together. Can't cost much.

Or do it yourself if you have a welder or friend who is a weldor.

 

[djradz]

Could you drill the whole thing out to 7/8"?

 

[sweettractors]

Anyone know where I can find one of these. I cannot find them at local Tractor supply. It goes on a 50-60 Year old ripper. On the ripper one hole is 7/8" and the other appears to be 1/2" which is why it has the 7/8" part and then the threads start.

Any help is appreciated

I have the pin with step in it---7/8 inch step and then drops down to 5/8 inch threaded. Ken Sweet

 

[dsimon552]

Awesome. Will call to order on Wednesday.