John Deere Disc Parts for sale, KBA, RW

[sweettractors]

We have just parted out a John deere disc and here is a picture of some of the commonly needed parts. The clamshell halves are $25 each, The Spool that goes inside the bearing housings is $25 each. The spool that goes between the blades is $18 and the upright pieces that have the big hole at the top work on the KBA are $18 each. Scrappers complete are $12 each and just the scrapper castings are $8 each. The end spacer washer is $10 each and the big butt washer is $15 each. All these parts are for a 1 inch axle disc and the spacers spools are 7 inches long. Email sweet@scrtc.com or call Toll Free 1-866-528-3323 or 270-528-3323. Ken Sweet

[spo307]

MY AXLE IS 1 1/8"

[sweettractors]

MY AXLE IS 1 1/8"

The clamshell halves should still work and also the scrappers are the same. Ken Sweet

[spo307]

Ken I need the spool bearing with the number I gave you. I do not need the halves. I need a couple sets of brackets and blades thanks

[sweettractors]

All my KBA parts for now are going to be for 1 inch axle. The scrapper casting numbers are 4 different. What casting # do you need on those? Ken Sweet

[spo307]

ken I need 2 complete sets bracket and scrapper B10435B, and 4 completes sets of B10434B, also 3 additional scrapper blades. thanks

[sweettractors]

ken I need 2 complete sets bracket and scrapper B10435B, and 4 completes sets of B10434B, also 3 additional scrapper blades. thanks

Sent you a PM with prices. Ken Sweet

[sweettractors]

Here is a link to our Ebay store with Casting numbers and measurements for these John deere KBA, RW, KBL etc. disc harrows with 1 inch axles. More coming in soon for the 1 1/8 inch axles. Ken Sweet
Sweetfarmequipment items - Get great deals on Scrapper for John Deere KBA and RW Disc Harrows items on eBay Stores!

[jimgerken]

I guess I need to part out my disk. It appears to be worth about 100 times what I paid for it if marketed as parts on ebay.

[sweettractors]

I guess I need to part out my disk. It appears to be worth about 100 times what I paid for it if marketed as parts on ebay.

That is the way to go, if you don't need a disc? I have a extra John deere KBA Pull disc and a John Deere KBL lift disc for my own use. Ken Sweet