John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,045
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
<font color=blue>do yourself a small favor and buy one of these China-made 3/4" drive socket sets.</font color=blue>
Have you had good luck with these tools? I picked up a cheap Chinese box wrench set a few years back and was very disappointed. The quality of the steel was about what I expected (cheap, but OK for occasional use). The sizes were not correct, however. All of the wrenches were just a little off of the sized that was stamped on them. Most were a bit too large, making them useless on any stubborn nuts, since they'd just slip off or round off the nut. I've never bought anything like them since. Have you noticed anything like this in your experience?
Have you had good luck with these tools? I picked up a cheap Chinese box wrench set a few years back and was very disappointed. The quality of the steel was about what I expected (cheap, but OK for occasional use). The sizes were not correct, however. All of the wrenches were just a little off of the sized that was stamped on them. Most were a bit too large, making them useless on any stubborn nuts, since they'd just slip off or round off the nut. I've never bought anything like them since. Have you noticed anything like this in your experience?