Plow

[bullbreaker]

Heres a link to a plow that looks to me like that one if not you have earlier version.Made by Brinly for JD ? :confused2:


http://www.tractorbynet.com/forums/john-deere-owning-operating/105007-jd-2305-single-mold-board.html

Not trying to sling the mud just trying to help.If its not accept my appoligy.
Many blessings wished to all TBN family folks out there.
Boone

 

[bigtiller]

Heres a link to a plow that looks to me like that one if not you have earlier version.Made by Brinly for JD ? :confused2:


http://www.tractorbynet.com/forums/john-deere-owning-operating/105007-jd-2305-single-mold-board.html

Not trying to sling the mud just trying to help.If its not accept my appoligy.
Many blessings wished to all TBN family folks out there.
Boone

I never said that Brinly made plows for JD. Brinly quit making plows a few years ago. JD bought that part of Brinly's buisness.

Also, if you look at the mast, it is close to a Brinly but the Cat 1 top link on the tractor will not fit on a Cat 0 Brinly. I know because I tried to do it once with my 2305. The coulter wheel arm has an offset bent in it. Brinly never did that. Most of them are bent back a little but that is from hitting something hard enough in the field to bend it. The beam in the pic appears to be one thick piece of steel. Brinly's are 2 pieces. This one has no standard. Brinly's standard is bolted inside the beem.

I hope this helps.

 

[bullbreaker]

I never said that Brinly made plows for JD. Brinly quit making plows a few years ago. JD bought that part of Brinly's buisness.

Also, if you look at the mast, it is close to a Brinly but the Cat 1 top link on the tractor will not fit on a Cat 0 Brinly. I know because I tried to do it once with my 2305. The coulter wheel arm has an offset bent in it. Brinly never did that. Most of them are bent back a little but that is from hitting something hard enough in the field to bend it. The beam in the pic appears to be one thick piece of steel. Brinly's are 2 pieces. This one has no standard. Brinly's standard is bolted inside the beem.

I hope this helps.

Read my p-link #11.
I never said you or anyone else said they made plows for JD.Just ran accross that old link and it looked "simular" to me.I even appoligized forehand if it was'nt.

Boone