755 1998

[Lampe208]

Proud owner of a 755 . Worked with a box blade yesterday. Awesome.. Do these three cylinders shake when idling

 

[Muhammad]

Welcome to TBN.

 

[JohnBoyMD]

I have a 955 and mine seems shake when at idle and smooths out at higher RPM's. Did you just get your tractor, or have you had it for a while?

 

[dsmau]

Hi,
My 855 also shakes at idle so I make sure everything is tied down and tight so there is no vibration noise...

 

[Lampe208]

Ok guys. Thank you. Yes I just got this and it's my first diesel also. Any tips would be appreciated. How about the fuel pump along side
Is that getting weak so at start it's starving for fuel?

 

[JohnBoyMD]

I really think it's just the nature of the beast.

If this is your first diesel, a word of advice....don't let it run out of fuel. They are hard to get started again and it's a messy process. I don't have any first hand experience, but I've gotten it from reliable sources.

 

[Lampe208]

Where can I find a loader for this. .?

 

[Briana03]

Hello & WELCOME to TractorByNet.com!

I have moved your thread to the Attachments Forum. You'll get a better response there.

 

[kebo]

Where can I find a loader for this. .?

I think the 755's used the Model 70A loader. JD doesn't make those loaders anymore, so if you want a used one, it will be like looking for a "black hole" in the nighttime sky. Your best bet will be to look at the aftermarket brands such as Bush Hog and Westendorf. There are a couple others, but the names escape me at the moment. Another thing to consider is whether you have power steering. Without PS, the steering may become hard to turn with a bucket full of material. Good luck.

 

[Mechanos]

Pretty sure he'd need a 70 loader for the 755. I know the 70A is for the 855 & 955.... not sure if it would fit the 755.