Results 51 to 54 of 54
-
07-08-2011, 02:47 PM #51Super Member
- Join Date
- Sep 2009
- Posts
- 5,648
- Location
- Greenwood Co., SC
- Tractor
- Yanmar YM2000
Re: TRACTOR WEIGHTS
Ok here i go, i finially got around to posting the picture of my tractor weights. The bar on the bottom is solid 3" steel bar stock about 40 something inches wide, the top pipe is about 3" ID and filled with lead. Both welded togeather tip the scales somewhere around 175 lbs. Thats about a 6ft hunk of Rail hanging off the back back there my guess on it is just shy of 400lbs?
YM2000. MF dirt scoop,4' Jbar bushhog,boompole, LMC 12-16 disk harrow, 4' Atlas boxblade (with rippers). 1980 chevy K10,1990 ford ranger 2wd (285K miles),1997 saturn SL2 (twin cam!!),2001Toyota Higlander
1986 Cobia 177 sunskiff w/1981 Johnson 60 hp
1991 Javalen 17ft w/same year 150 Johnson GT
Troybuilt 4 cycle & Echo 2 stroke,cold natured(need carb rebuild),MS390 Stihl, Northern tool pressure washer, mixes water into the oil in the pump(now dead, motor on a tiller). 5000 watt generator.
-
09-01-2012, 02:21 PM #52New Member
- Join Date
- Sep 2012
- Posts
- 2
- Location
- Palestine,TX
- Tractor
- YM2000 Yanmar 2WD
Re: TRACTOR WEIGHTS
I have a YM2000 and I need to know where I can get Weights for the rear wheels and front - end of my tractor.
-
09-01-2012, 02:38 PM #53Bronze Member
- Join Date
- Apr 2011
- Posts
- 53
- Location
- GRAHAM CO. N.C.--Elv. 3150'
- Tractor
- Yanmar 1610 2X4 tractor---Kabota B 2320 4X4 7 Kobelco SK015 Excavator
Re: TRACTOR WEIGHTS
If I had the time I would have fabricated some as some on here have done------But I had not the time so I bought some from my dealer.
I think your YM dealer can get them for you----but be prepared---they be high $$$$$
-
09-01-2012, 09:33 PM #54New Member
- Join Date
- Sep 2012
- Posts
- 2
- Location
- Palestine,TX
- Tractor
- YM2000 Yanmar 2WD
Re: TRACTOR WEIGHTS
Thank you
Reply With Quote
