Looking for 3-point adapter for Loader

   / Looking for 3-point adapter for Loader #1  

TGF

Gold Member
Joined
Apr 4, 2010
Messages
284
Location
Blair, NE
Tractor
3038E
I have searched the site and found several of the opposite of what I want, adapters that let loader accessories be used with the 3-point. I am actually looking for something I can put on my loader arms that allows me to pick up and manipulate 3 point attachments to assist with maintenance jobs and storage. I have a JD 300 series loader, so it would need to be a JD QT to 3-point or iMatch would be really convenient.

Something like this only for JD.

HORST WELDING | HLA >> THREE POINT HITCH ADAPTER
 
   / Looking for 3-point adapter for Loader
  • Thread Starter
#2  
no body?
 
   / Looking for 3-point adapter for Loader #5  
I built something similar... made HF quick hitch.
2ceqng7.jpg

wbfnkk.jpg
 
   / Looking for 3-point adapter for Loader #7  
Couldn't you just weld a jd quick connect plate to a imatch and use that?

Where have you found setups to put a fel quick connect on the 3pt arms. I have been looking for something like that but have had no luck and figured I would have to make something when I had time.
 
   / Looking for 3-point adapter for Loader #8  
My approach was a little different since I wanted the same side tilt
capability you have with a rear 3PH. I welded up a 3PH with arms
and links that fits on my pallet fork frame.

Here is my rake, which I can adjust for side tilt. I also fit a pole inside
the rake frame after removing the rake, and have a front-mounted
boom pole.
 

Attachments

  • FEL_3PH_rake.jpg
    FEL_3PH_rake.jpg
    102.4 KB · Views: 2,129
  • truss_inst_3.jpg
    truss_inst_3.jpg
    97.6 KB · Views: 606
   / Looking for 3-point adapter for Loader
  • Thread Starter
#10  
Couldn't you just weld a jd quick connect plate to a imatch and use that?

Where have you found setups to put a fel quick connect on the 3pt arms. I have been looking for something like that but have had no luck and figured I would have to make something when I had time.

Sadly I can't weld for beans, so it looks like what I am going to do is go down to TSC and buy a 3-point QC and a hitch reciever, hit the JD dealership buy a set of loader connects, then go to a local welder and have him put it all together for me. Thanks for the help guys.
 
 
 
Top