Results 1 to 3 of 3
  1. #1

    Default Help! JD950 Hydraulic expert. FEL to rockshaft?

    I have a JD950(1984) TW drive, no PS, and no hydraulics other than the rockshaft. I have purchased a Koyker 160 FEL. All controls, and hydraulic lines were included up to quick connect connections on pressure and return lines. How do I connect in to the rockshaft block? Do I need additional hydraulic devices? How do I maintain rockshaft hydraulics, and get oil to the FEL? Help! I am apparently living in a hydraulic information Black Hole around here. Thanks.

  2. #2
    Veteran Member
    Join Date
    Jul 2002
    Greene Co, Arkansas
    JD 1050 2wd, Case 580D 2wd

    Default Re: Help! JD950 Hydraulic expert. FEL to rockshaft?

    There is a divider/valve block on my 1050 for the FEL and the power steering. The 1050 is basicly a turbo'd 950 so I'd bet it's the same for the 950. A shop manual or the dealer's computer would tell you more.

  3. #3

    Default Re: Help! JD950 Hydraulic expert. FEL to rockshaft

    Thanks for the info Scott. I've ordered a shop manual. Two of the local JD dealers have tried to help but without much success. I'll keep asking. Thanks again. David

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2014 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.