Ridgewalker
Platinum Member
I was told that posting a link to my pix here might get more attention.
So...here we go.
Old iron - TractorByNet.com
So...here we go.
Old iron - TractorByNet.com
Obviously the plow is a Dearborn 10-1...plenty out there..I've got a completely redone 10-8. If the shears/points are good, keep it...if they are worn out..good luck finding any more for almost any price. As far as the disk, grease it up and pull it.. good luck. BobG in VA
Any idea as to date of manufacture?
I have a Dearborn plow I need shares for it, I searched everywhere for them and couldn't find them.
So I decided I would make a set for my self, I have drawn up a set in my CAD software of what I think new shares would be like (I dont have a picture of them new I am working on what I have left and a lot of guessing).
Does anyone know where I could get a picture of what the shares looked like originally? Measurements?
And do you think there would be any market for making the shares for others?
thank you Ridgewalker,
does anyone know what is the logic on shares that curve down to a point vs flat like a razor?