Backhoe sub frame kubota l3130

[bambie]

can anyone tell me were to get measurements for sub frame for backhoe attachment for kubota l 3130. purchased the unit about four months ago it has front loader assembly, also front mount snow blower came with it , i recently
purchased LW 6 backhoe attachment for it, also is it possible to operate the backhoe from the tractor seat, as i don't like the setup of having two seats

 

[Luremaker]

Here is a drawing of the Woods backhoe subframe taken from the Woods manual. You can download the complete manual from Woods site. Not sure about the dimensions but looking at the drawing should give you an idea of the mount points on your L3130.

 

[teg]

bambie, What are your main uses for the backhoe? Also, what is your land like? Big rocks or nice dirt... if you don't try and dig up 24" oak stumps but rather dig ditches in soil... you might be fine without a subframe.

LW 6 backhoe is a china import? correct? You might want to read this thread:
http://www.tractorbynet.com/forums/build-yourself/171760-how-build-your-own-custom.html

 

[bambie]

yes this is the type of frame i am looking for shouldn't have any problems fabricating this frame. thanks for the reply much appreciated, when i get it fabricated i will post some pictures

 

[teg]

We always love pictures :thumbsup: but building a subframe in on my bucket list... so I would *really* appreciate that post!!! I just don't know if I can build one

 

[RickB]

If you place any value on your time, I will sell that subframe cheaper than you can build it, providing shipping isn't prohibitive. PM me if you are interested.

 

[Luremaker]

Bambie,

I just noticed you have your subframe built. Hope you do not mind me linking your pictures on this thread. You did a great job... congratulations :thumbsup:.

 

[denk]

If you place any value on your time, I will sell that subframe cheaper than you can build it, providing shipping isn't prohibitive. PM me if you are interested.

i'll bite on this one. i have an L3130DT with a bush hog m246 loader. had it for almost 7 years now. originally had a bush hot 750 backhoe on it, but sold the backhoe so i could use the tractor's 3 point capabilities.

i want to add a 4-point easy on/off backhoe to the tractor and was told that the kubota bh92 won't work with the m246 frame. the dealer is checking on the bush hog 75 cbh for compatibility with the m246 loader.

assuming this is a no-go, is there any way that i can add a easy on/off backhoe to my tractor?

thanks.

 

[bambie]

yes you can get sub frame like I added to mine it works fine