Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Platinum Member corey9212's Avatar
    Join Date
    May 2010
    Posts
    726
    Location
    Innisfail, AB
    Tractor
    2013 John Deere 6125R

    Default Has anyone Installed and used one of these?

    Was at my local ag store today and saw this in their flyer. Has anyone installed and used one of these in their tractors? If so how well did it work?
    Thank you.
    - 2013 John Deere 6125R
    - H340 Front End Loader w/85" bucket and grapple
    - 7' Frontier RC2084 Rotary Cutter, 7' Frontier GM2084R Finishing Mower, 6' KingKutter Land Grader, 8' Frontier FG12G Front blade with hydraulic tilt, 5' Westwood Powered Sweeper, 5' Disk, 5' Drag Harrow, 55 Gallon Spraytech 3PH Sprayer, 90 Gallon Water Carrier, 3 point bale spear, 3 point pallet forks, 7' GM2084R grooming mower, 10' 3-PT harrow, 12' 1470 discbine, RR2109 rotary rake, 568 Megawide plus round baler.

  2. #2
    Member
    Join Date
    Mar 2012
    Posts
    49
    Location
    Perry, Georgia
    Tractor
    Kubota L3240

    Default Re: Has anyone Installed and used one of these?

    What is it used for?

  3. #3
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,993
    Location
    MN
    Tractor
    Ford 960, 7700, TW20, 1720; IHC H, 300; Ollie S77

    Default Re: Has anyone Installed and used one of these?

    It is a sparyer controller, it allows you to control three different branches of a boom sprayer with electric 12v selinoids. So you can shut off or on different parts of the spray boom wit the flip of a switch.

    I don't know much about that brand, but they are common on many many farm sprayers all across the corn belt.

    --->Paul

  4. #4
    Platinum Member corey9212's Avatar
    Join Date
    May 2010
    Posts
    726
    Location
    Innisfail, AB
    Tractor
    2013 John Deere 6125R

    Default

    Are they meant for this type of sprayer?
    Thanks
    - 2013 John Deere 6125R
    - H340 Front End Loader w/85" bucket and grapple
    - 7' Frontier RC2084 Rotary Cutter, 7' Frontier GM2084R Finishing Mower, 6' KingKutter Land Grader, 8' Frontier FG12G Front blade with hydraulic tilt, 5' Westwood Powered Sweeper, 5' Disk, 5' Drag Harrow, 55 Gallon Spraytech 3PH Sprayer, 90 Gallon Water Carrier, 3 point bale spear, 3 point pallet forks, 7' GM2084R grooming mower, 10' 3-PT harrow, 12' 1470 discbine, RR2109 rotary rake, 568 Megawide plus round baler.

  5. #5
    Elite Member teg's Avatar
    Join Date
    Jul 2005
    Posts
    4,021
    Location
    Raleigh, NC Hillsville, VA
    Tractor
    L2800.

    Default Re: Has anyone Installed and used one of these?

    It can be fitted on the spray boom from a sprayer (sold separately). Normally, you use one for the right and left boom and for the section behind the tractor.

    Turn pressure On and Off via. electrical switch verse and manual cutoff valve.

    EDIT: see you post a photo of the sprayer - looks like you have a two section boom (you could plumb in the third for a hand wand). The sprayer in the photo looks like it's easy enough to reach back and turn On / Off the different section. I think the controller was made for larger tractors (kind of over kill for ones that you can reach the controls from the seat).

  6. #6
    Platinum Member corey9212's Avatar
    Join Date
    May 2010
    Posts
    726
    Location
    Innisfail, AB
    Tractor
    2013 John Deere 6125R

    Default

    Quote Originally Posted by teg
    It can be fitted on the spray boom from a sprayer (sold separately). Normally, you use one for the right and left boom and for the section behind the tractor.

    Turn pressure On and Off via. electrical switch verse and manual cutoff valve.

    EDIT: see you post a photo of the sprayer - looks like you have a two section boom (you could plumb in the third for a hand wand). The sprayer in the photo looks like it's easy enough to reach back and turn On / Off the different section. I think the controller was made for larger tractors (kind of over kill for ones that you can reach the controls from the seat).
    I can't reach the controller from the seat cause of the cab, I knowticed it has a psi gauge and I am presuming I could control the psi with the switch? If so that would be one of the reasons I would like to get it cause where I spray I am constantly adjusting the psi depending on what area is being sprayed.
    The sprayer has a two section boom and it has a wand as well.
    - 2013 John Deere 6125R
    - H340 Front End Loader w/85" bucket and grapple
    - 7' Frontier RC2084 Rotary Cutter, 7' Frontier GM2084R Finishing Mower, 6' KingKutter Land Grader, 8' Frontier FG12G Front blade with hydraulic tilt, 5' Westwood Powered Sweeper, 5' Disk, 5' Drag Harrow, 55 Gallon Spraytech 3PH Sprayer, 90 Gallon Water Carrier, 3 point bale spear, 3 point pallet forks, 7' GM2084R grooming mower, 10' 3-PT harrow, 12' 1470 discbine, RR2109 rotary rake, 568 Megawide plus round baler.

  7. #7
    Platinum Member pjbci's Avatar
    Join Date
    Feb 2012
    Posts
    712
    Location
    Summit. Ms
    Tractor
    JD 4840, 450j, 310, komatsu D31px22, IH 1486, MF 135, MHF TO35

    Default

    I have one that looks just like that controlling my 60ft boom. It was fairly simple to install and easy to use. Other than it was made with cheap parts that I have had to replace over the yrs, I am well satisfied with it.

  8. #8
    Elite Member teg's Avatar
    Join Date
    Jul 2005
    Posts
    4,021
    Location
    Raleigh, NC Hillsville, VA
    Tractor
    L2800.

    Default Re: Has anyone Installed and used one of these?

    Quote Originally Posted by corey9212 View Post
    I can't reach the controller from the seat cause of the cab...
    HA, there is a downside of cabs!!! Can you post a closer photo of your controller?

  9. #9
    Platinum Member corey9212's Avatar
    Join Date
    May 2010
    Posts
    726
    Location
    Innisfail, AB
    Tractor
    2013 John Deere 6125R

    Default

    Quote Originally Posted by teg
    HA, there is a downside of cabs!!! Can you post a closer photo of your controller?
    Lol, I've knowticed a few downsides to having a cab too. I don't have a closer photo cause I don't have the controller yet. That photo was from the flyer but I think I will order it tomorrow.
    - 2013 John Deere 6125R
    - H340 Front End Loader w/85" bucket and grapple
    - 7' Frontier RC2084 Rotary Cutter, 7' Frontier GM2084R Finishing Mower, 6' KingKutter Land Grader, 8' Frontier FG12G Front blade with hydraulic tilt, 5' Westwood Powered Sweeper, 5' Disk, 5' Drag Harrow, 55 Gallon Spraytech 3PH Sprayer, 90 Gallon Water Carrier, 3 point bale spear, 3 point pallet forks, 7' GM2084R grooming mower, 10' 3-PT harrow, 12' 1470 discbine, RR2109 rotary rake, 568 Megawide plus round baler.

  10. #10
    Elite Member foreman Etexas's Avatar
    Join Date
    Jul 2011
    Posts
    2,754
    Location
    texas
    Tractor
    kubota M7040 &m7040

    Default Re: Has anyone Installed and used one of these?

    I can reach out the back window and cut mine on and off but wish sometimes it was simple as small switchs in cab but I would really like if the boom folded in by a switch 16ft gates and 21ft boom-spraying-jpg

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.