Front-End Loader Anyone make a FEL tree pruner?

[OrangeJbird]

Has anyone made a tree pruner that fits on their FEL?

[amigauser]

LIMBHOG Details

Been discussed on TBN before but can not locate the old thread. See vendor link above.

[bcp]

More:

Limbinator Saw (Single)

http://www.tractorbynet.com/forums/a...b-snipper.html

Bruce

[fcoats]

Heres one on orange tractor. He made it and it looks professionally done. When I get some of my current projects completed I plan to do that as well.

Tree limb saw fabrication project - OrangeTractorTalks - Everything kubota

Good Luck,

Filo

[SandyTX]

From one of my older posts. (not mine; picture I found online). No way I'd try that.

[OrangeJbird]

From one of my older posts. (not mine; picture I found online). No way I'd try that.

Thanks, lots of gre . . . ah . . . er ideas!

[Leejohn]

I made this and need to use it again soon. Works good. I callled it my poormans pole saw.

[Todd727]

If you have a log splitter, you can modify it to do the job. Mount the splitter to a QA plate and use the tractor hydraulics to run it. I did it with my skid steer and it works great.

Here is a video of one that you can buy: Skid Steer Tree Trimmer and Wood Splitter - YouTube

I mounted mine to the plate vertically, as described in this ad: Skid Steer Inverted Log Splitter

I still might fab a claw type cutter, but that would just be an exercise in fabrication at this point. Product Navigation