Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2003
    Posts
    14
    Location
    SE Fla
    Tractor
    Kubota L3830 GST

    Default Bush Hog Model 12 & L3830

    I know this sounds stange, but we need some help on how to unhook bush hog from tractor, mainly the driveline from the pto shaft. I'm sure it's probably very simple, (tractor & bush hog were dropped off with NO instruction on how to unhook or hook up). thanks for any help

  2. #2
    Epic Contributor Bird's Avatar
    Join Date
    Mar 2000
    Posts
    36,981
    Location
    Texas

    Default Re: Bush Hog Model 12 & L3830

    The rotary cutter should have come with an Owner's Manual that shows how to do it, but the online version of the manual shows the Model 12 to have the pin type release. With everything shut down, feel the very front end of the PTO driveshaft at the tractor and you'll find a spring loaded pin that you can press in. Press in the pin and hold it in while you pull the shaft loose from the tractor. When you hook it back up, you can slide it partway onto the tractor output shaft, then hold the pin in while you slide it all the way forward; release the pin and pull back to let it click into place.

  3. #3

    Join Date
    Mar 2003
    Posts
    14
    Location
    SE Fla
    Tractor
    Kubota L3830 GST

    Default Re: Bush Hog Model 12 & L3830

    Thanks for the quick reply,Bird!! The collar over the shaft was spring loaded(pull back on it to lock it) and raise the cutter to lock it back in position.Now to learn how to take it off and put it back on in less than 30 minutes.
    Thanks again for your help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.