burnsboy
New member
I borrowed a FC RT10-66 and after two passes, the upper bearing in the Chain Driven Gear box blew up. The "after-effect" was the Chain Adjuster (a 3/8" Steel bar with a hook end) broke and wedged into the lower gear and damaged both the upper & lower gears (Good news is the Chain survived).
I am looking for a SERVICE Manual (not an Owner manual) on this unit as to the dis-assembly and reassembly of the bearings and the orientation of the Chain Adjuster. I have talked to five in-state and out-of-state dealers and no one knows how to repair this unit. I also talked with BuySmart in N.C and they have been unable to help thus far. I was able to order new parts but need to get the upper bearing removed and re-installed as well as the orientation and "adjustment" of the Chain adjuster (since it was broken at the hook portion when I opened the cover, I did not see it in the correct position.)
Doe anyone know if a Service Manual exists for RT-10 unit or has anyone repaired one of these units?
I am looking for a SERVICE Manual (not an Owner manual) on this unit as to the dis-assembly and reassembly of the bearings and the orientation of the Chain Adjuster. I have talked to five in-state and out-of-state dealers and no one knows how to repair this unit. I also talked with BuySmart in N.C and they have been unable to help thus far. I was able to order new parts but need to get the upper bearing removed and re-installed as well as the orientation and "adjustment" of the Chain adjuster (since it was broken at the hook portion when I opened the cover, I did not see it in the correct position.)
Doe anyone know if a Service Manual exists for RT-10 unit or has anyone repaired one of these units?