Front-End Loader Loader cylinder repair

[harpman]

Anyone know a source besides Snap-on for a spanner wrench to fit a Kabota LB 400 loader hyd cylinder? The nut is 2.14" (54mm) and has a 5/32" (3.8mm)hole.

[leonz]

Mac tools, Mcmaster Carr, W.W. Grainger, NAPA, to name a few.

[dfkrug]

Anyone know a source besides Snap-on for a spanner wrench...

Unless you are in the biz, you don't really have to buy a special tool at all. What I do
for that style of cylinder is I take some salvaged rollers from old tapered roller bearings,
then tap them in the gland hole. Then I wrap the gland with a rag to avoid scratching it.
Finally, I take some giant Channel-lock pliers and grab/turn. The tapered rollers wedge
in pretty well, and are easy to remove.

If the gland is already scratched up, then I just use a big pipe wrench.

[harpman]

Thanks!

Mac tools, Mcmaster Carr, W.W. Grainger, NAPA, to name a few.

[TraderMark]

baileynet.com also carries spanner wrenches for cylinders.

[kennyd]

I bought mine from amazon. Do a search for "adjustable pin spanner"

[harpman]

Thanks to all you for your help.

[kennyd]

Here is the one I bought: http://www.amazon.com/gp/product/B00...ls_o00_s00_i01