Rear Finish Mower Trouble with King Kutter Finish Mower

   / Trouble with King Kutter Finish Mower #1  

Fishguy

Silver Member
Joined
Aug 24, 2005
Messages
101
Location
Northeastern NC (flatland)
Tractor
NH TC30 HST
I have a 6' king kutter, rear discharge mower that I am suddenly having problems with. All the trimmings are thrown to the left side of the mower when cutting. I started having problems with the grass being cut on the left side not being cut all the way. It started looking as if the blades were worn so I replaced all three. That did not fix the problem. I then thought that maybe something with the air flow underneath so I scraped all the old clippings off the bottom. Still didn't help. All the wheels are adjusted to the same height, the tires are solid so no low air and the bearings on the wheels are good.

Any ideas???

Thanks in advance,
Steve
 
   / Trouble with King Kutter Finish Mower #2  
When you replaced the blades did you replace them with actual OEM blades? Was any of the old blades bent? Are your blades off-set with each other, or they all in line with each other? Do the bearings in the spindles still feel tight? Just some helpful things to look at.
 
   / Trouble with King Kutter Finish Mower #3  
First remove your belt and make sure all the blade spindles spin free. When you reinstall your belt check the tension. It seems like your belt is slipping.
Bill
 
 
 
Top