New JD Cat 1 Quick Hitch

   / New JD Cat 1 Quick Hitch #1  

Victory Pete

Silver Member
Joined
Dec 15, 2011
Messages
168
Location
Rhode Island
Tractor
John Deere 2320 and X320
Hi
I have finally bought one of these https://jdparts.deere.com/partsmkt/d...ches_Quick.htm I got the PMQH100 which is black. I was a bit surprised to see how much paint was scraped off, it was shipped without any wrapping or cardboard. It took me a few hours to set up my 3 implements, Frontier box blade and york rake, Land Pride broadcast spreader. I had to do a little modifying but it seems to work well. I am surprised the 1" pins dont fit tight in the Quick Hitch, there is some slop in there. My understanding is that I dont need bushings if I am using 1" Cat 1 implements with the Cat 1 Quick Hitch. Anyone have experience with this hitch? It is now time to touch it up with the free can of paint my dealer gave me.

VP
 
   / New JD Cat 1 Quick Hitch #2  
Pete,
Your link doesn't work. but my cat 1 I Match hitches require cat 3 bushings on the implements for a proper snug fit without alot of play.
 
   / New JD Cat 1 Quick Hitch
  • Thread Starter
#3  
   / New JD Cat 1 Quick Hitch
  • Thread Starter
#4  
I just talked to my dealer and there are 7/8" to 1" bushings for this hitch. He wasnt aware they were needed. You think John Deere would mention that you need these bushings.

VP
 
 
 
Top