Printable View
I would check with the dealer first, you may surprised.
Here is are some on ebay. I would have posted the links last night but I was using my phone and it is hard.
SKID STEER LOADER QUICK ATTACH BOBTACH ADAPTER ASSEMBLY Bobcat, New Holland | eBay
Bobcat Skid Steer Quick Attach ( BobTach ) - Will Ship for $99 | eBay
Here is my search I used on ebay. You may find more.
skid steer quick attach | eBay
I would guess that I have the ATI adapter that HCJtractor has if I am reading the product list below correctly, however I have a slightly higher capacity Kubota FEL with approx 2500 lbs of lift.Quote:
Originally Posted by Rockgod
http://www.preseeder.com/PDF/AttachProductList2010.pdf
If you look at the adapters starting on page 14, you will see that ATI has a heavy duty model and a standard duty model. I also notice that the JD models which yours is one of, to a large extent are heavier in weight than the Kubota models. The QA-KU5 model at 88 lbs which I believe HCJtractor has is standard duty and is the one I have. Like you, I have been very pleased with mine but I am careful to use it to mostly lift and push. I have never thought the SSQA style lends itself to pulling backwards, twisting motions or to attachments that do not fit snugly against the lower pins. I have stalled out my ~2500lb lift numerous times and had it hold up the front "half" of a nearly 10,000lb machine with the FEL stabilizing the front of the tractor and repositioning the backhoe end with the bucket without a problem. I try to keep my loads square, particularly since I know mine is the standard duty model. I agree that the adapter breathes new life into older tractors and that SSQA is the way to go due to the numerous attachments available and the relative ease of connecting/disconnecting them.
I bought my ATI adapter from everything attachments. Free shipping and friendly people. Switched out the pin on bucket to the adapter in about an hour. Then modified the bucket with a plate to hook back up to the SSQA so I could still use it.Quote:
Originally Posted by Alpha Dog
Not sure how to reply without a quote. My quick attach came with my LA1162 loader.Quote:
Originally Posted by JoeBuyer
The rest. :
It is easy and cheap to adapt to. I made several attachments for mine. forks and a boom pole. Now I also acquired a nice Bobcat T190 track loader so my attachments fit the Bobcat, and the stuff that came with the bobcat also fit my tractor.
Spend the money, Ann buy kubota if you can. You won't regret quality.
Rockgod, I agree the welds are fine. My only issue was with the latches. I also think the latch mechanism needs to be shielded on the front side, with grapple use. In your picture, the spring and lift rod are totally exposed from the front so a log or branch in the grapple can easily damage this relatively fragile system. Now if used on a bucket, it would not matter. I'll admit I use mine aggressively and can see how pulling backwards could stress the pin, but if the sleeve the pin rides in was a block of steel rather than a piece of pipe, it would not deform and split like mine has. All I know is after a few hours of use, my pin was bound in the sleeve and had to be hammered out, and I spent an hour filling the inside of the sleeve. I wish I had a reamer that size.. Welding some expanded metal in the back of the grapple would also protect it from damage.Quote:
Originally Posted by Rockgod
Wow, k0ua, did you get that from a local dealer where you are? One of the dealers that do a lot of advertising on tractor forum sites that I checked with a couple of months ago, said that he would sell me the "parts to build one" from Kubota for a little over $1100, and that I'd be better off to buy an after-market one (he suggested another source, since he didn't sell aftermarket parts and was not trying to work a deal). I will check with a dealer around here, and see what they say.
It was from the Kubota dealer in Berryville, Ar.Quote:
Originally Posted by Alpha Dog
He brought it out and helped me put it on.. took about 5 minutes.
James K0UA
Hey, that's only 1200 miles round trip for me, or $300 of that $4 a gallon gas, that'd still be cheaper than what I've been quoted so far!:)
I've driven 1100 miles in one stretch a couple of times in the last year, might be worth a road trip!
How often do you change FEL attachments? I would like a skidsteer QA mount so I could change back an forth between the grapple, bucket, and forks, however, I find that 99% of the time the grapple does everything I need better than the other two. I figured it wasn't worth the extra money to change all the brackets out.