Massey 431 FEL

   / Massey 431 FEL #1  

JPUGH

New member
Joined
Sep 27, 2012
Messages
6
Location
Montgomery,Alabama
Tractor
Massey 431,Kubota b6200
I have a Massey 431 with FEL. It currently uses both remotes to operate loader. While looking at some pics on internet I noticed that some are plumbed into the side of the tractors remote valve and then to the loaders valve bank. There isnt a port where it looks like the hose is plumbed,I can tell that the return is plumbed into the return on the tractor where there is a T already . Has someone taken the side off and drilled and tapped it for a port or is the side plate a "kit". Mine doesnt have the valve bank on loader which I want to add bcause I want a third remote to run a clamp .This would also not tie up the remotes on the back so the would not have to be unplugged every time I needed them for something else.Would it be an open center or a closed center valve bank needed? 431-2.jpg431-1.jpg
 
   / Massey 431 FEL #4  
i just need to know what the cab lights mean . i bought one used with no owners manual and can't find one to buy under 150.00
 
   / Massey 431 FEL
  • Thread Starter
#5  
i just need to know what the cab lights mean . i bought one used with no owners manual and can't find one to buy under 150.00

Which one? There r 13 lights . Most you can figure out . Some like the second one up one right is the air cleaner, next one up is engine oil, next gear box oil, across top from left ,first one not use , next steering oil, next trailer inddicator,next pto,next glow plugs, the next row starting from right to left first one is high beams, next 4wd,next parking brake,next blinkers. Hope this helps
 
 
 
Top