It is oriented nearer the bottom. Just like in the manual.
Printable View
It is oriented nearer the bottom. Just like in the manual.
Thanks, I'll flip mine around after I weld the new plug onto the plate.Quote:
Originally Posted by dex3361
What did people do before TBN to solve these problems?
pretty common to have the oil check sump level on that type of gearbox BELOW the input shaft seal.
as the gear spins it will distribute oil..e tc..
pretty common to have the oil check sump level on that type of gearbox BELOW the input shaft seal.
as the gear spins it will distribute oil..e tc..
Regarding the wiring that comes off of the brushes at the end of the shaft...Quote:
Originally Posted by dex3361
Could those possible be associated with the 12V DC, 8.3A outlet located on the outlet panel? Just an after thought. Sorry to beat this dead horse.
Not only did they tap the threads at an angle and nearly strip them...they placed the plate upside down! Those Chinese slave labor kids...Quote:
Originally Posted by Soundguy
someone must have missed their 1 bowl of rice a day / 10 cent paycheck that week to have messed up like that....
The wires to the brushes are to provide exitation voltage to the rotor coil and the voltage comes from the AVR (Automatic Voltage Regulator).Quote:
Originally Posted by sdkubota