Front-End Loader John Deere 4100 loader

[tomcatoib]

i am wanting to put a front end loader on my john deere 4100 and want to kmow what model to get and were a good deal on one is thanks for any help!! thomas

[kennyd]

Do you have the hydraulics (joystick) on your tractor?

[tomcatoib]

Yea I do it is a 2001 model

[kennyd]

If you want a JD FEL, the model 410 was the original one sold for it but that will be a tough find. The newer model 200cx is available for your machine. There are a few aftermarket choices, everything will be in the $3000+ range.

[tomcatoib]

I was looking at the 200 xc did not know if it would fix would like to spend the least as possible thanks

[Agent Blue]

The problem is the owners that bought a machine with the loader seldom want to split up the attachments as they are worth more together and an easier sell. Dealers, in my experience will not split up a trade. If you did find a used loader you may have to buy the specific mount for your series tractor. Now your back to 80% of new. I built my own. If I remember correctly it cost $800 total for the parts and a week in the shop.
Good luck with your search.

[tomcatoib]

i found a 200 xc do u know how much a mount would cost? it was off a 2305 jd that mount would not fit the 4100?

[kennyd]

Here are all the parts involved, you will have to check with your dealer for prices:




MOUNTING FRAMES (4100, 4110 TRACTORS)

Cart key PART NO. PART NAME QTY SERIAL NO. 200X 200CX REMARKS

1 AW34065 Frame 1 X X (SUB FOR AW33483) L.H.
2 W51622 Self-Locking Screw 6 X X M20 X 40MM
3 AW33481 Plate 1 X X L.H.
4 AW33480 Plate 1 X X R.H.
5 W51621 Self-Locking Screw 14 X X M10 X 35MM
6 AW34064 Frame 1 X X (SUB FOR AW33482) R.H.
7 14M7300 Flange Nut 2 X X M20
8 W51614 Self-Locking Screw 6 X X M12 X 35MM
9 14M7275 Nut 6 X X M12
10 LVU12858 Bushing 2 X X 22.650 X 36.460 X 32 mm

Cart key PART NO. PART NAME QTY SERIAL NO. 200X 200CX REMARKS

11 14M7335 Nut 2 X X M20 JAM NUT
12 W50795 Rod 1 X X