Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Nov 2012
    Posts
    3
    Location
    Emery, UT
    Tractor
    Kubota 4050

    Default Help needed, 2 bottom Case plow

    So, I have broke two parts on my plow and need to identify the model and hopefully find some parts. Part reads T1207. I attached pictures of the unknown case plow nad the part.

    thx

    Help needed, 2 bottom Case plow-2012-11-16_10-36-15_81.jpgHelp needed, 2 bottom Case plow-2012-11-19_12-49-50_451.jpgHelp needed, 2 bottom Case plow-2012-11-16_10-36-02_71.jpg

  2. #2
    Elite Member MIKE R's Avatar
    Join Date
    Sep 2010
    Posts
    4,079
    Location
    PRINCE TWP, ONTARIO
    Tractor
    MASSEY 1020, CASE SC, FARMALL F12 and F20

    Default Re: Help needed, 2 bottom Case plow

    Do you see any serial tags on it? The part in the second picture attaches to the turning shaft up near the tractor. I am not sure of its purpose but it looks like a stop of some kind. I've never dealt with a plow like this before.
    Last edited by MIKE R; 11-19-2012 at 05:57 PM.
    "If the women don't find you handsome, they should at least find you handy" - Red Green

    2013 TRACTOR CRUISE VIDEO
    https://www.youtube.com/watch?v=MCSNh8qmaus

  3. #3
    New Member
    Join Date
    Nov 2012
    Posts
    3
    Location
    Emery, UT
    Tractor
    Kubota 4050

    Default Re: Help needed, 2 bottom Case plow

    I looked it over really good. No serial number or model number that I can find. What is left of one sticker mentions to block the implement up when unhooking it. The other is what is left of the Case name and where it was made. The picture in the middle you can see the keystock wedged and broke the hub. You can see where it attached in the first picture ( i squirted the springs with wd-40). The chain hooks to the rod in the senter of those springs then to a geat that rotates the plow over. I would have welded it already if it wasn't cast.

  4. #4
    Gold Member
    Join Date
    Nov 2012
    Posts
    254
    Location
    Newark, de
    Tractor
    International 424

    Default Re: Help needed, 2 bottom Case plow

    You can weld Cast iron with special rod and heat the cast iron up, or Braze it.
    I prefer brazing.

Similar Threads

  1. Priceheck: Case 2 bottom drag plow
    By kocher in forum Attachments
    Replies: 1
    Last Post: 07-02-2012, 12:20 PM
  2. Case 2 Bottom Trip plow?
    By Pumpkin Farmer in forum Parts/Repairs
    Replies: 4
    Last Post: 04-15-2012, 07:47 PM
  3. Case 2 bottom trip plow?
    By Pumpkin Farmer in forum Attachments
    Replies: 0
    Last Post: 04-15-2012, 10:46 AM
  4. Dearborn 2 bottom, now a 1 bottom plow ready to roll!
    By yeagisyeag in forum Attachments
    Replies: 7
    Last Post: 04-16-2009, 05:23 PM
  5. Making a 2 bottom plow into a 1 bottom plow?
    By ky_madman in forum Attachments
    Replies: 7
    Last Post: 02-08-2009, 07:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.