Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Platinum Member allen in texas's Avatar
    Join Date
    Oct 2007
    Posts
    747
    Location
    Levelland, TX
    Tractor
    Kubota Grand L 5740, loaded R1's w/642 lbs cast weight, 854 loader

    Default More pics. I thing the oliver rollover is going to work.

    A few smashed fingers and a new blood blister, two new holes in my head and one mashed toe and and soon to be obtained new 3x8 hydraulic cylinder and I think I'll be good to go.
    Attached Thumbnails Attached Thumbnails -setting-up1-jpg   -setting-up-2-jpg   -setting-up3-jpg   -all-bolted-up1-jpg   -all-bolted-up2-jpg  

    -all-bolted-up3-jpg  
    KK 72" tiller Rears SPF 72 inch Flail, FL960 knives, Cammond BS72E 6 foot BB,
    HF Quick hitch, RBT3584 rear blade.
    assorted two and 4 row diamond bar equipment, all junky.
    20 ft Big Tex 70CH
    Maxey 14000# 16'x83" GN dump trailer
    Oliver 6241 3 bottom rollover moldboard plow
    http://www.youtube.com/watch?v=EdEStYYl1Ts
    I like straight furrows
    1960 model 102 Ford 14 inch two bottom rollover plow on my little L3240

  2. #2
    Platinum Member allen in texas's Avatar
    Join Date
    Oct 2007
    Posts
    747
    Location
    Levelland, TX
    Tractor
    Kubota Grand L 5740, loaded R1's w/642 lbs cast weight, 854 loader

    Default Re: More pics. I thing the oliver rollover is going to work.

    I moved the front bottoms 8 inches toward the center of the plow, the middle bottom 4 inches and left the rear where it was. The plow is now set up at 14 inches and my tire spacing is going to work out. I need to drill 4 more holes and am finished. The factory holes would only allow 4 inches toward center on the front bottom and the middle bottom was not adjustable. It is now. Of course I need new shares and shins but that's the easy part. I have found a source.
    KK 72" tiller Rears SPF 72 inch Flail, FL960 knives, Cammond BS72E 6 foot BB,
    HF Quick hitch, RBT3584 rear blade.
    assorted two and 4 row diamond bar equipment, all junky.
    20 ft Big Tex 70CH
    Maxey 14000# 16'x83" GN dump trailer
    Oliver 6241 3 bottom rollover moldboard plow
    http://www.youtube.com/watch?v=EdEStYYl1Ts
    I like straight furrows
    1960 model 102 Ford 14 inch two bottom rollover plow on my little L3240

  3. #3
    Super Star Member
    Join Date
    Jul 2011
    Posts
    14,436
    Location
    Yanceyville, North Carolina
    Tractor
    Kubota L4400

    Default Re: More pics. I thing the oliver rollover is going to work.

    That is what I call a "Labor of Love". Well done. Best wishes.
    The PUPIL who does not surpass his Master, fails his Master.

  4. #4
    Elite Member
    Join Date
    Sep 2010
    Posts
    4,087
    Location
    ONTARIO
    Tractor
    MASSEY, CASE , FARMALL

    Default Re: More pics. I thing the oliver rollover is going to work.

    Very well done. Oliver made real good plows. Does your plow have the Radex moldboards on it?

  5. #5
    Platinum Member allen in texas's Avatar
    Join Date
    Oct 2007
    Posts
    747
    Location
    Levelland, TX
    Tractor
    Kubota Grand L 5740, loaded R1's w/642 lbs cast weight, 854 loader

    Default Re: More pics. I thing the oliver rollover is going to work.

    Quote Originally Posted by MIKE R View Post
    Very well done. Oliver made real good plows. Does your plow have the Radex moldboards on it?
    Yep!
    KK 72" tiller Rears SPF 72 inch Flail, FL960 knives, Cammond BS72E 6 foot BB,
    HF Quick hitch, RBT3584 rear blade.
    assorted two and 4 row diamond bar equipment, all junky.
    20 ft Big Tex 70CH
    Maxey 14000# 16'x83" GN dump trailer
    Oliver 6241 3 bottom rollover moldboard plow
    http://www.youtube.com/watch?v=EdEStYYl1Ts
    I like straight furrows
    1960 model 102 Ford 14 inch two bottom rollover plow on my little L3240

  6. #6
    Veteran Member kebo's Avatar
    Join Date
    May 2006
    Posts
    2,287
    Location
    Lexington, SC
    Tractor
    2001 John Deere 790 4x4, bar tires

    Default Re: More pics. I thing the oliver rollover is going to work.

    Nice work! I hope you are going to paint this thing and give it the look it deserves? We must have a video of it in operation too!
    Nothing could be finer than riding my JD790 in South Carolina!!

    2001 John Deere 790 4x4 with Model 70 FEL, 5ft International World Agritech bush hog, 5ft Wallberg BB, 5ft Frontier disc harrow, 5ft King Kutter II Rototiller, 5ft Cultipacker, 5ft Sitrex finish mower, Leinbach PHD with 9" & 12" augers, Leinbach middlebuster, Leinbach #11 Field Cultivator, boom pole, custom 3pt handi-hitch, clamp on bucket forks, Pat's Easy Change.

    Nothing runs like a Deere, or smells like a John....

  7. #7
    Platinum Member allen in texas's Avatar
    Join Date
    Oct 2007
    Posts
    747
    Location
    Levelland, TX
    Tractor
    Kubota Grand L 5740, loaded R1's w/642 lbs cast weight, 854 loader

    Default Re: More pics. I thing the oliver rollover is going to work.

    I already have the codes for three different shades of Oliver green so yes, I plan to strip it, sandblast it and paint it. Just have to figure out which one to use. Dern sure don't want to get it the "wrong" green if you catch my drift. It will be awhile though. Lots of other irons in the fire.

    No offense to John Deere now.

    A video?
    I need to make sure I can pull it first.
    Last edited by allen in texas; 12-23-2012 at 11:08 AM.
    KK 72" tiller Rears SPF 72 inch Flail, FL960 knives, Cammond BS72E 6 foot BB,
    HF Quick hitch, RBT3584 rear blade.
    assorted two and 4 row diamond bar equipment, all junky.
    20 ft Big Tex 70CH
    Maxey 14000# 16'x83" GN dump trailer
    Oliver 6241 3 bottom rollover moldboard plow
    http://www.youtube.com/watch?v=EdEStYYl1Ts
    I like straight furrows
    1960 model 102 Ford 14 inch two bottom rollover plow on my little L3240

  8. #8
    Super Member
    Join Date
    Dec 2007
    Posts
    5,296
    Location
    Ohio
    Tractor
    JD 5520, 790 TLB-- Kub L4300, B7800, MX5100

    Default Re: More pics. I thing the oliver rollover is going to work.

    Quote Originally Posted by allen in texas View Post
    I already have the codes for three different shades of Oliver green so yes, I plan to strip it, sandblast it and paint it. Just have to figure out which one to use. Dern sure don't want to get it the "wrong" green if you catch my drift. It will be awhile though. Lots of other irons in the fire.

    No offense to John Deere now.

    A video?
    I need to make sure I can pull it first.
    I've been through the color match Oliver Green thing before and the only reasonable choice for me was off-the-shelf stock ag store "Oliver Green". The other two choices are not readily available and you would have them mixed to order for lots more $$$. Maybe the Oliver Club would have a lead but I used plain old "Oliver Green" and no one ever said anything. For me it didn't matter because I had decals that were not fully correct anyway.
    ******

    May I be the kind of person my dogs think I am,

  9. #9
    New Member
    Join Date
    Nov 2012
    Posts
    18
    Location
    Harlingen
    Tractor
    friends

    Default Re: More pics. I thing the oliver rollover is going to work.

    Very well done. Oliver made real good plows.


  10. #10
    Elite Member Baby Grand's Avatar
    Join Date
    Nov 2007
    Posts
    3,578
    Location
    Windsor, CT.
    Tractor
    L3240GST, B2320HST, B5100D & G5200H

    Default Re: More pics. I thing the oliver rollover is going to work.

    Man, that thing looks heavy! Nice job with the restoration, by the way.
    Looking forward to seeing some (more) pictures of furrowed soil.
    That's the problem with trouble.
    It always starts out as such fun."
    - Randall Brown

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 29
    Last Post: 01-10-2013, 07:31 AM
  2. Oliver 3 bottom rollover plow (Farmwithjunk, you still here?)
    By allen in texas in forum Attachments
    Replies: 17
    Last Post: 12-18-2012, 12:41 PM
  3. Oliver Radex 2 Bottom Plow before and after Pics
    By sweettractors in forum Attachments
    Replies: 5
    Last Post: 05-12-2012, 01:07 AM
  4. Tractor Rollover with Pics
    By TnWV in forum Safety
    Replies: 13
    Last Post: 06-19-2011, 11:48 PM
  5. my work pics.
    By Anonymous Poster in forum Owning/Operating
    Replies: 7
    Last Post: 01-12-2003, 09:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.