Rear Blade Adding hydraulic angle to rear blade

[94BULLITT]

I finished the fabrication on the blade.
The cylinder and hoses should arrive UPS tomorrow.
<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=297587"/> <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=297588"/> <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=297589"/>
Tom

I think it needs a few JD or frontier decals.

[BIG DOOLEY]

Hi Roger,
Not a bad idea.
I have seen them for sale on ebay.
All various sizes, styles and the prices were not too bad.
Tom

[Chilly807]

I think you'll like it for snow removal, it beats getting on and off the tractor every 2 minutes to re-adjust the blade. I'd be lost without power angle now.

Sean

[94BULLITT]

Hi Roger,
Not a bad idea.
I have seen them for sale on ebay.
All various sizes, styles and the prices were not too bad.
Tom

I got some decals of ebay probably cheaper than what I could have bought them locally and I did not have to drive to a pick them up.

[BIG DOOLEY]

Mounted up the cylinder tonight after work and it work wonderfully.
I gave it a short try-out and scaped some ice off the road.
I am truely going enjoy this feature.


Tom

[94BULLITT]

It looks very good, like it was factory made.

Do you use the blade without bushings on the QH?

[BIG DOOLEY]

Thanks.
No bushings on the 2 lower pins.
I picked some up at TSC and accidentally bought the wrong size.
It's on the opposite side of the town I haven't been out there since.
I have to buy some more hydraulic fluid and might get out there after dinner one night this week and get the right ones then.

Tom

[94BULLITT]

Thanks.
No bushings on the 2 lower pins.
I picked some up at TSC and accidentally bought the wrong size.
It's on the opposite side of the town I haven't been out there since.
I have to buy some more hydraulic fluid and might get out there after dinner one night this week and get the right ones then.

Tom

You may want to check at your tractor dealer. Mine was waaaayyyyy cheaper than TSC on bushings.

[mjncad]

Excellent work!

[BIG DOOLEY]

Thanks Matt