Page 3 of 6 FirstFirst 123456 LastLast
Results 21 to 30 of 53
  1. #21
    Elite Member Zebrafive's Avatar
    Join Date
    Aug 2010
    Posts
    2,897
    Location
    South West MI
    Tractor
    John Deere 2030, John Deere 6415

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by TitanSkidsteer View Post
    The latch plates on the Boxed assembly are 1/4" thick The gussets and boxes are 5/16". The tube wall is 1/4". It has a sturdy, solid feel.

    The top (or back side plates) are 22" tall and 7" wide. (These will be wider when we get this item into full production)

    The boxed in assembly weight is 137 lbs. An OEM kubota quick tach is 106 lbs.

    We have a few of the boxed in quick tach assemblies here: Quick Tach Conversion Assembly | Acessories and other attachments | palletforks.com

    And just the latch plates here: Quick Tach Conversion kit | Acessories and other attachments | palletforks.com
    How much wider will the rear mount plates be when in full production?
    What will the overall width of the boxed unit be? (with the wider rear plates)
    Will it be available in John Deere Green, instead of Kubota orange?
    John Deere 2030 JD 245SL Loader
    John Deere 6415 mfwd JD 640SL Loader

  2. #22
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by RFB View Post
    Am I correct in understanding that this will be "plug n' play"? In other words, pull the pins from a (for example kubota LA403) pinned bucket and then pin this onto the FEL?
    Hi RFB,

    It is not "plug and play". Both of these versions are for the user that can weld or has access to someone who can. The tabs will have to be cut from your bucket and welded onto one of these units.

    Thanks for checking with us,
    Bill
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  3. #23
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,434
    Location
    SW Indiana
    Tractor
    Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by TitanSkidsteer View Post
    Hi RFB,

    It is not "plug and play". Both of these versions are for the user that can weld or has access to someone who can. The tabs will have to be cut from your bucket and welded onto one of these units.

    Thanks for checking with us,
    Bill
    Bill,

    I think you might be onto a successful new product category here. One thing to consider is giving your customers some hints on removing those original equipment tabs from their buckets without damaging the thin sheetmetal underneath. I recall some posts by people removing them in order to mount a QA plate and they had an awful time with them. If your customers have the same problems, you'll be reading about it here.

  4. #24
    Silver Member Burtonbr's Avatar
    Join Date
    Nov 2012
    Posts
    114
    Location
    NC
    Tractor
    Kubota b2620, LA364 loader.custom rear remotes, THUMB bucket grapple, 60" box blade 72" landscape rake &many other toys

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Looks good, what's the width between back plates where you would weld the mounts from your bucket ? Afraid it may be too wide for my application on a LA364 loader.

  5. #25
    New Member
    Join Date
    Aug 2012
    Posts
    8
    Location
    Goodrich Michigan
    Tractor
    Kubota 3010

    Default Re: Quick Attach Conversion Kit.... Need a little help

    I just ordered one I hope it will fit my LA481 with no issues very cool it is orange .

    Quick Tach Conversion Assembly | Acessories and other attachments | palletforks.com

  6. #26
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by Burtonbr View Post
    Looks good, what's the width between back plates where you would weld the mounts from your bucket ? Afraid it may be too wide for my application on a LA364 loader.
    The total width is 49" and each of the plates are 7" wide and 22" tall. These plates will be wider on future editions when we run this in full production in 60-90 days.
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  7. #27
    Silver Member
    Join Date
    Aug 2010
    Posts
    139
    Location
    Central Indiana
    Tractor
    Mahindra 5010 4WD HST Cab, Mahindra 2615 Gear, Scag Tiger Cat 48", Gravely 42" ZTR, EZ GO Gas Golf Cart

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Are these designed only for kubota tractors? I have a Mahindra 2615 w/M106 loader and would love to be able to add a sqa to it and your kit and price are amazing.

  8. #28
    Veteran Member
    Join Date
    Apr 2011
    Posts
    1,095
    Location
    Erie Pa.
    Tractor
    Montana R4944, Ford Jubilee, Ford 621, Ford 841

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Really great idea! I like the new version of the kit better than the first one that you had pictured because the rear plate would be much harder to fab with only the GH's themselves. After the loader arm brackets are welded on all that would be needed would be the plate for the bucket, nice!
    Montana R4944
    Ford Jubliee, Ford 841, Ford 621 industrial with FEL & BH

  9. #29
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Thank you everyone for your comments and suggestions. This type of feedback and advice is priceless for us.

    We have a few customers working on the photos so that $100 offer has been satisfied.

    We are sold out of the boxed in version of the quick attach kit and we will have more in about 6 weeks. We have about 10 more sets of the quick tach plates ready to ship. For those of you who want a boxed in version and cannot wait it would be a straightforward task to use the John Deere to Skid Steer Adapter for converting a pined on loader to QT hookup. Of course welding and cutting skills will be needed for that job. You can see the Deere adapter here: John Deere style Attachments | Deere Style Quick Tach Adapter | palletforks.com

    Thank you all again for the support and advice!

    Have a good and safe upcoming weekend,
    Bill
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  10. #30
    Elite Member Zebrafive's Avatar
    Join Date
    Aug 2010
    Posts
    2,897
    Location
    South West MI
    Tractor
    John Deere 2030, John Deere 6415

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by TitanSkidsteer View Post
    Thank you everyone for your comments and suggestions. This type of feedback and advice is priceless for us.

    We have a few customers working on the photos so that $100 offer has been satisfied.

    We are sold out of the boxed in version of the quick attach kit and we will have more in about 6 weeks. We have about 10 more sets of the quick tach plates ready to ship. For those of you who want a boxed in version and cannot wait it would be a straightforward task to use the John Deere to Skid Steer Adapter for converting a pined on loader to QT hookup. Of course welding and cutting skills will be needed for that job. You can see the Deere adapter here: John Deere style Attachments | Deere Style Quick Tach Adapter | palletforks.com

    Thank you all again for the support and advice!

    Have a good and safe upcoming weekend,
    Bill
    I can wait six weeks. You never answered if the boxed version could be had in John Deere green, but at least I know you have that color!
    John Deere 2030 JD 245SL Loader
    John Deere 6415 mfwd JD 640SL Loader

Page 3 of 6 FirstFirst 123456 LastLast

Similar Threads

  1. Quick attach conversion
    By jacobsdaddy06 in forum Buying/Pricing/Comparisons
    Replies: 1
    Last Post: 07-01-2012, 08:16 AM
  2. Quick attach conversion
    By ENG18LT in forum Hydraulics
    Replies: 2
    Last Post: 03-01-2012, 11:45 PM
  3. JD FEL quick attach conversion to Bob Cat
    By MD3 in forum Customization
    Replies: 6
    Last Post: 08-14-2010, 12:19 PM
  4. TC35 FEL quick attach conversion??
    By navyjoe in forum New Holland Owning/Operating
    Replies: 9
    Last Post: 07-12-2007, 10:33 AM
  5. FEL bucket conversion to a Quick Attach???
    By Bob_Skurka in forum New Holland Owning/Operating
    Replies: 8
    Last Post: 09-27-2004, 02:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.