Results 1 to 4 of 4
-
02-20-2013, 09:50 PM #1
- Join Date
- Feb 2013
- Posts
- 4
- Location
- Dorothy N.J
- Tractor
- Kubota B-7800
Need some help!
I have a b7800 kubota and installing a quick attachment on the bucket. Installing it on the tractor was know problem but the bucket is a different story. I cut off the pins attachment on the bucket. My question is how do I determine the height of the plate?
-
02-21-2013, 05:59 AM #2
- Join Date
- Feb 2013
- Posts
- 4
- Location
- Dorothy N.J
- Tractor
- Kubota B-7800
Re: Need some help!
Well, the welder is coming out in the morning. What I can up with is the bucket plate is about 1" above the bucket, seems like any lower the bottom of the plate will be too low and will hit the ground when I back scrap with the bucket down and curled up.
I hope this is right.
-
02-22-2013, 05:19 PM #3
- Join Date
- Feb 2013
- Posts
- 4
- Location
- Dorothy N.J
- Tractor
- Kubota B-7800
Re: Need some help!
Everything worked out perfect.
Thank you
-
02-22-2013, 05:26 PM #4
Re: Need some help!
Don
MF GC2400, FEL, 60in.MMM, 5ft. Cultivator, Single Bottom Plow, Bush Hog RTC48 tiller, MF 2360 front mount snowblower, 5ft backblade. BXpanded Piranha toothbar.