Results 1 to 4 of 4
  1. #1
    Platinum Member Deerherd's Avatar
    Join Date
    Apr 2012
    Posts
    911
    Location
    315ver, NY
    Tractor
    LS P7030 CPS, 2016 Bobcat E42, Ferris IS3100z w/37 HP Kawasaki

    Default Advice on Brillion cultipacker please

    I have been searching for a cultipacker and found this Brillion 8 foot double roller. It's the best I have seen so far and the $450 price seems more than fair. There was grease on the fittings and all the rollers seemed ok. Is there any thing in particular I should look for and if something is bad/breaks would I have a reasonable chance of finding parts? Also what is the benefit/reason for two rollers? Thanks!

    Advice on Brillion cultipacker please-image-jpg


    Advice on Brillion cultipacker please-image-jpg

  2. #2
    Veteran Member npalen's Avatar
    Join Date
    Nov 2009
    Posts
    1,007
    Location
    Beloit, KS
    Tractor
    Kubota B9200 HSTD and Allis 720

    Default Re: Advice on Brillion cultipacker please

    Dave,
    The benefit of two rollers is doing twice the work in one pass. Should do a great job of breaking up clods. Yes, the $450 does seem like a great price. Hope it works great for you.

  3. #3
    Platinum Member spruce Deere's Avatar
    Join Date
    Feb 2009
    Posts
    708
    Location
    Northmost Idaho
    Tractor
    John Deere 790 w/ 300 loader

    Default Re: Advice on Brillion cultipacker please

    Good find and a good price. A lot of these old usable implements vanished when the scrap iron salvage craze hit in this area

    As far as parts go when needed, Sweets tractors might could help you out. Its old enough guessing by the 4-sided nuts and design some new stuffs from Brillion may be no longer available.

    The nice thing about older implements like Brillion, they were built rather well and built to be "rebuild".
    790 JD W/ 300 loader
    Lots of implements for loader and 3pt
    Can't do it burn'n diesel, is not worth do'n

  4. #4
    Platinum Member Deerherd's Avatar
    Join Date
    Apr 2012
    Posts
    911
    Location
    315ver, NY
    Tractor
    LS P7030 CPS, 2016 Bobcat E42, Ferris IS3100z w/37 HP Kawasaki

    Default Re: Advice on Brillion cultipacker please

    Thanks guys and I figure the scrap price would keep me from losing too bad. I looked at some of Sweets cultipackers and they were done up nice. Maybe I could "restore" this one! I pick it up Thursday.

Similar Threads

  1. Replies: 36
    Last Post: 07-19-2013, 11:11 AM
  2. brillion cultipacker
    By browning1 in forum Attachments
    Replies: 1
    Last Post: 01-17-2012, 03:59 PM
  3. 12 FT Brillion Cultipacker for "Big" Foodplots
    By sweettractors in forum Attachments
    Replies: 0
    Last Post: 09-21-2011, 01:24 PM
  4. Used Brillion cultipacker with Combo hitch
    By sweettractors in forum Attachments
    Replies: 0
    Last Post: 09-14-2010, 12:52 PM
  5. Old Brillion Cultipacker/Seeder
    By patladner in forum Parts/Repairs
    Replies: 2
    Last Post: 11-03-2008, 03:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.