Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Mar 2013
    Posts
    2
    Location
    chesterfield mi
    Tractor
    kubota l3350

    Default get it wright first time

    Want to buy tiller my tires are 70" wide want 72" tiller my PTO hp is 32hp the tiller says 35hp to 50hp the soil on my farm is very soft so do you think it will work fine or is it to much strain on the pto ?

  2. #2
    Silver Member
    Join Date
    Feb 2012
    Posts
    202
    Location
    Albany OR
    Tractor
    Case 580B, Long 460, Allis-Chalmers 160

    Default Re: get it wright first time

    According to this

    TractorData.com Kubota L3350 tractor information

    your first gear is .9 mph - likely slow enough that, with "soft" soil and not too deep on first pass, it should do fine. I have a 6 foot Priefert for my AC 160 ( 40 pto, first is .7, second is .9 - I typically till in first, but could do with second. Another 40 horse Long I have has 1.4 mph first, and I used that tiller on it - just took a couple more passes for same tilth.

    Point being, neither of those tractors ever breaks a sweat with a 6 footer (6 tines per rotor) so yours should be OK - not a beast, but usable... Steve

    Oh, and once you've used a tiller that covers BOTH tires, you won't wanna go back...

  3. #3
    Super Member murphy1244's Avatar
    Join Date
    Nov 2011
    Posts
    6,468
    Location
    Ohio
    Tractor
    Kioti DK 40-Massey ferguson 135-Simplicity Conquest

    Default Re: get it wright first time

    From Ohio
    Murph ------------ Sent from my HP laptop


    Nothing runs like a Deere when being chased by a Kioti

  4. #4
    New Member
    Join Date
    Mar 2013
    Posts
    2
    Location
    chesterfield mi
    Tractor
    kubota l3350

    Default Re: get it wright first time

    Thanks ill find out soon.
    Quote Originally Posted by BukitCase View Post
    According to this

    TractorData.com Kubota L3350 tractor information

    your first gear is .9 mph - likely slow enough that, with "soft" soil and not too deep on first pass, it should do fine. I have a 6 foot Priefert for my AC 160 ( 40 pto, first is .7, second is .9 - I typically till in first, but could do with second. Another 40 horse Long I have has 1.4 mph first, and I used that tiller on it - just took a couple more passes for same tilth.

    Point being, neither of those tractors ever breaks a sweat with a 6 footer (6 tines per rotor) so yours should be OK - not a beast, but usable... Steve

    Oh, and once you've used a tiller that covers BOTH tires, you won't wanna go back...

  5. #5
    Super Member
    Join Date
    Feb 2008
    Posts
    7,750
    Location
    somewhere usa
    Tractor
    stuff

    Default Re: get it wright first time

    I have run my 72" tiller with my 820 with 31pto hp but most of the time I use my 4520 with 50 pto hp. Both can get the job done but the higher hp can maintain higher rpms' and at a much faster ground speed.

  6. #6
    Platinum Member
    Join Date
    Jun 2012
    Posts
    709
    Location
    Mt Crawford Va
    Tractor
    massey GC 2400 JD LA 145

    Default Re: get it wright first time

    I run a 60" KK on my 18 hp massey and it don't break a sweat. Run it at 1500 rpm and 2500 rpm is 540 pto. You should have no problem.

Similar Threads

  1. First time tractor owner, long time wanting one
    By Nomandy in forum New Member Introductions
    Replies: 7
    Last Post: 02-04-2013, 10:04 PM
  2. First time poster-long time reader-I need a new Tractor
    By kybadcat36 in forum Buying/Pricing/Comparisons
    Replies: 8
    Last Post: 08-14-2009, 05:39 AM
  3. Loader dvice for a long-time lurker, first time poster?
    By davesalisbury in forum Attachments
    Replies: 13
    Last Post: 03-14-2007, 05:40 AM
  4. Kubota Hour Meter-Real Time or PTO Time
    By GuyL in forum Kubota Owning/Operating
    Replies: 2
    Last Post: 07-18-2006, 11:12 PM
  5. Posthole Digger Roper-Wright Post Hole Digger
    By 5103Owner in forum Attachments
    Replies: 2
    Last Post: 02-09-2006, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.