startagain
New member
Hi,
Hope this is the right place to post for this issue.
I recently purchased a Bulldog BD1616 Backhoe and wondered if anybody else had experienced the same appalling finish and lack of quality control that has been my experience. The boom and bucket look like they have been painted on top of rust. Pins that secure the boom are held in place with nuts and bolts that are of different lengths. Two bolts that would have secured pins were missing entirely, and there were no transport securing pins for the boom supplied. At least 10 grease nipples are not functional and will have to be replaced, and there are leaks from the hydrolic control system that I will have to investigate.
I find this degree of quality control appalling, but would be interested in knowing what other people think. Maybe I am just to fussy.
Hope this is the right place to post for this issue.
I recently purchased a Bulldog BD1616 Backhoe and wondered if anybody else had experienced the same appalling finish and lack of quality control that has been my experience. The boom and bucket look like they have been painted on top of rust. Pins that secure the boom are held in place with nuts and bolts that are of different lengths. Two bolts that would have secured pins were missing entirely, and there were no transport securing pins for the boom supplied. At least 10 grease nipples are not functional and will have to be replaced, and there are leaks from the hydrolic control system that I will have to investigate.
I find this degree of quality control appalling, but would be interested in knowing what other people think. Maybe I am just to fussy.