lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,716
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
My RBT45108 with skid shoes and no hydraulics was $3600 six years ago. 2 years later I find out that I could have bought it with no adjustment bars at all and saved about $600. Here is a pic of it brand new, ready to get unloaded off of the trailer. :thumbsup: The improvement over my first rear blade in indescribable. :cool2: For your gauge wheel setup. Use a 3" x 10"-12" stroke and like you said, mount the cylinder up on the boom maybe half way and you will easily be able to get vertical or even towards the tractor movement. Not that hard to do, just put the thinking cap on. Thinking about it a bit more and you should be able to get the tail all the way up and over the boom.
Brian;
Presently NH TL100-A has only two remotes. With all your blade experience I would guess that, in order of importance, blade angle, blade tilt, and lastly blade offset. Am I close?
Thanks
Rick