Jimbrown
Veteran Member
I need to buy a rear blade or a box scraper and can not tell which one is better for my needs. I have about 1200 feet of dirt drive way that has been crowned and ditched by a road grader. I want to be able to do repair work on this with out destroying the crown and ditches. I also have a 1 ac house site that has been cleared and leveled and a house built on it I want to be able to slope the edges of the cleared area to cause water to run off of the house site. I have a BX 22. It seems to me that a back blade would be needed to cut the angle for the road crown and to slope the house site. I have been reading a thread over on Tractor Point where another guy is getting advice to buy a box scraper. I do not see how the box scraper can cut the slopes?
I would appreciate any advice on this as I have never used either one of them. I realize I probably need both but do not want to buy both at the same time. Thanks.
JIM
I would appreciate any advice on this as I have never used either one of them. I realize I probably need both but do not want to buy both at the same time. Thanks.
JIM