8' disc behind L3540?

[orangeandgreen]

I pull an old 8' Tufline behind my L3240 but have to engage the 4 wd if the ground is a little heavy.

 

[jeff9366]

I pull an old 8' Tufline behind my L3240 but have to engage the 4 wd if the ground is a little heavy.

What is the diameter of the pans in your Tufline Disc Harrow? 18"?

 

[orangeandgreen]

I will measure them tomorrow.

 

[hunt4570]

I will measure them tomorrow.

Cool, I'm trying to get more info on the one I saw too, pan size etc..

 

[orangeandgreen]

Pans measure 19" front and rear, scalloped all around.

 

[hunt4570]

Ok, someone made mention of pulling the disc through a narrow passage, and with the trees I have here I've decided to try to find a decent 6-6 1/2' disc.

Whats anyone know about the Linebach line.I know they are now out of buisness, but I found a mildly uses 6 1/2 foot one ,heavy box construction, notched pans, with the big threaded adjusters for $1200, they even have a new one of the same but want $1600.. a little to rich for my blood.

 

[hunt4570]

Sounds like a job for your loader to me. Got any pictures of each set? They are a long way from me but I might be interested in the set you don't buy. Eight foot does sound like a lot for a L3540. Is it a 3 Point hitch setup or drawbar towed. If it is 3PH can your hitch pick it up?

Sorry no pics, Wade is the guys name he owns Griffin Tractor & Equipment, lots of stuff, give him a call at 704-221-8210

 

[jeff9366]

Ok, someone made mention of pulling the disc through a narrow passage, and with the trees I have here I've decided to try to find a decent 6-6 1/2' disc.

As you adjust the disc gangs, total width of the Disc Harrow changes. The LESS aggressive, straighter, the gangs are set, the greater the total width of the implement.

 

[C4Ranch]

Have you looked at everythingattachments?

Everything Attachments XTreme Duty Deluxe Box Frame Disc Harrow

If you go up to 7' you could get into their "large" line with 1 1/8" shaft and 4.5mm pans Be sure to look at disc thickness too, they very.. Lots of options with disc harrows..
Everything Attachments XTreme Duty Large Deluxe Box Frame Disc Harrow

I have their 24/20 and am happy with it. I prefer the design where the gangs protrude out of a solid side plate rather than the "sandwich" approach.

 

[hunt4570]

Have you looked at everythingattachments?

Everything Attachments XTreme Duty Deluxe Box Frame Disc Harrow

If you go up to 7' you could get into their "large" line with 1 1/8" shaft and 4.5mm pans Be sure to look at disc thickness too, they very.. Lots of options with disc harrows..
Everything Attachments XTreme Duty Large Deluxe Box Frame Disc Harrow

I have their 24/20 and am happy with it. I prefer the design where the gangs protrude out of a solid side plate rather than the "sandwich" approach.

Yes I have.. the larger ones are getting way out of my price range ( I do this stuff for fun, I don't make money with it) the smaller ones are just a bit out of range, and then I would have to figure out how to get it here..