I need a measurement please.

[hunt4570]

27" on my LA724, for comparison.
It's a pin-on, so probably a little shorter than your distance would measure.
It's the HD "round-back" bucket with a bolt-on cutting edge.
-Jim

Thanks Jim.

 

[4570Man]

Sorry for the long wait, I forgot about it. I had already taken the bucket off and put on the grapple before I remembered. The bucket is 21 inches from the cutting edge to the back of the bucket. It is probably 6 more inches from the back of the bucket to the pin.

 

[hunt4570]

Sorry for the long wait, I forgot about it. I had already taken the bucket off and put on the grapple before I remembered. The bucket is 21 inches from the cutting edge to the back of the bucket. It is probably 6 more inches from the back of the bucket to the pin.

Thanks, already bought a new bucket and it was worth every penny.. working well now..

 

[4570Man]

What was the size difference?

 

[hunt4570]

What was the size difference?

About 9 inches or 30%.

The new bucket is right at 20 inches straight line from the leading edge to the flat where the loader attaches, the old one was 29"