TraderMark
Gold Member
- Joined
- Feb 25, 2001
- Messages
- 387
- Location
- Southeast Georgia
- Tractor
- Ford 1720, 2910 John Deere 970, Case 1845
Harv....
I promised some pics if I came up with anything that worked for a rake on my FEL.
Well.... here's what I made and so far it works pretty darn well.
I was hoping to use the same scarifiers that came with my Tufline box blade but I found the 90 degree shank to tooth angle was too much and I had trouble getting the rake to "dump" properly so I used scarifiers bought from Agri-Supply that have only a slight bend in the shank itself.
I used 2X4X1/4 tubing for the main bar and 3/8X4 flatbar for the ends.
I promised some pics if I came up with anything that worked for a rake on my FEL.
Well.... here's what I made and so far it works pretty darn well.
I was hoping to use the same scarifiers that came with my Tufline box blade but I found the 90 degree shank to tooth angle was too much and I had trouble getting the rake to "dump" properly so I used scarifiers bought from Agri-Supply that have only a slight bend in the shank itself.
I used 2X4X1/4 tubing for the main bar and 3/8X4 flatbar for the ends.