Titan Attachments 5/16 quick attach plate

[CTMassey]

Anyone have experience with Titan Attachments 5/16 QA plate or 1/2 QA cutout plate? I need a blank plate for snowplow mount and their price is right.....thankyou;

 

[Btown]

I have one of their quick attach plates. It does what it's supposed to do.

 

[Sponge Bob]

I bought the 3/8 QA plate and used it for my snow plow mount. Seemed to be well made and as you stated it was priced right.

 

[George2615]

I bought their 1/2" plate and adapted it to a 7.5' truck plow for my tractor. The 5/16" would probably have been strong enough but I wanted overkill. There is a thread on my plow build.

Snow Plow Build - Page 3

 

[k0ua]

Anyone have experience with Titan Attachments 5/16 QA plate or 1/2 QA cutout plate? I need a blank plate for snowplow mount and their price is right.....thankyou;

I am pretty sure that is where I bought mine several years ago. I put it on my old Kubota bucket. and it worked very well.

 

[downsizingnow48]

I used a 5/16" Titan plate for this ssqa-to-3pt adapter. No issues.

 

[Rustyiron]

The 5/16 would be fine, but it requires further reinforcement for a snowplow. A good 3x3x3/8 angle left to right (just the width of the plow A frame) would do the trick and be a good place to make the plow "pin" to a couple of tabs on each side.

 

[BoylermanCT]

I used their 3/8" plate for my plow, and it works great.

 

[CTMassey]

Thankyou Everyone!!

 

[fredflintstone]

I used a titan quick attach with a 3 pt adapter to attach plow and still able to use just the three point adapter