JD 435 string tie issues

   / JD 435 string tie issues #1  

toplink

New member
Joined
May 15, 2012
Messages
23
Location
Mocksville, NC
Tractor
John Deere 2030, 6320, 720D, 455, 322
Hi folks,
I posted this over in the haying thread as well, so forgive the double post. I am having an issue with my 435. The wrap system has been giving me a lot of heartburn (which is a whole other issue to be discussed at another time), but at present I'm having an issue with my twine not cutting. The issue isn't knife, or activation, but rather the string is not running across the anvil under the knife when the tubes return home and trigger the knife. when the tubes are in the home position, both runs of twine are about two inches to the left of the knife causing it to simply miss the string. I have read the operating, and the troublshooting sections of the manual, and nothing speaks to this issue.
What am I doing wrong?

Thanks in Advance,

Tim
 
   / JD 435 string tie issues
  • Thread Starter
#2  
Disreguard, figured it out.
Tim
 
 
 
Top